lkml.org 
[lkml]   [2023]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V5 3/5] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
From
On 23/06/2023 19:46, Jagadeesh Kona wrote:
> Add support for the camera clock controller for camera clients to be
> able to request for camcc clocks on SM8550 platform.
>
> Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
> ---
> Changes since v4:
> - Removed overloading .l config with CAL_L and RINGOSC_CAL_L fields
> - Used clk_lucid_ole_pll_configure() to configure lucid ole pll's
> - Used module_platform_driver() instead of subsys_initcall()
> Changes since v3:
> - No changes
> Changes since v2:
> - No changes
> Changes since v1:
> - Sorted the PLL names in proper order
> - Updated all PLL configurations to lower case hex
> - Reused evo ops instead of adding new ops for ole pll
> - Moved few clocks to separate patch to fix patch too long error
>
> drivers/clk/qcom/Kconfig | 7 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/camcc-sm8550.c | 3383 +++++++++++++++++++++++++++++++
> 3 files changed, 3391 insertions(+)
> create mode 100644 drivers/clk/qcom/camcc-sm8550.c

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-06-24 15:56    [W:0.083 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site