lkml.org 
[lkml]   [2023]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 15/15] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
    From
    On 24.06.2023 02:41, Marijn Suijten wrote:
    > Enable MDSS and DSI, and configure the Samsung SOFEF01-M ams597ut01
    > 6.0" 1080x2520 panel.
    >
    > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
    > ---
    > .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 59 ++++++++++++++++++++++
    > 1 file changed, 59 insertions(+)
    >
    > diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
    > index 9f8a9ef398a2..bdf7c15f9b83 100644
    > --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
    > +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
    > @@ -179,6 +179,43 @@ &i2c3 {
    > /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
    > };
    >
    > +&mdss {
    > + status = "okay";
    > +};
    > +
    > +&mdss_dsi0 {
    > + vdda-supply = <&pm6125_l18>;
    > + status = "okay";
    > +
    > + panel@0 {
    > + compatible = "samsung,sofef01-m-ams597ut01";
    > + reg = <0>;
    > +
    > + reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
    > +
    > + vddio-supply = <&pm6125_l12>;
    > +
    > + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
    > + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
    > + pinctrl-names = "default", "sleep";
    > +
    > + port {
    > + panel_in: endpoint {
    > + remote-endpoint = <&mdss_dsi0_out>;
    > + };
    > + };
    > + };
    > +};
    > +
    > +&mdss_dsi0_out {
    > + remote-endpoint = <&panel_in>;
    > + data-lanes = <0 1 2 3>;
    > +};
    > +
    > +&mdss_dsi0_phy {
    > + status = "okay";
    > +};
    > +
    > &pm6125_adc {
    > pinctrl-names = "default";
    > pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
    > @@ -469,6 +506,28 @@ vol_down_n: vol-down-n-state {
    > drive-strength = <2>;
    > bias-disable;
    > };
    > +
    > + sde_te_active_sleep: sde-te-active-sleep-state {
    > + pins = "gpio89";
    > + function = "mdp_vsync";
    > + drive-strength = <2>;
    > + bias-pull-down;
    > + };
    > +
    > + sde_dsi_active: sde-dsi-active-state {
    > + pins = "gpio90";
    > + function = "gpio";
    > + drive-strength = <8>;
    > + bias-disable;
    > + };
    > +
    > + sde_dsi_sleep: sde-dsi-sleep-state {
    > + pins = "gpio90";
    > + function = "gpio";
    > + drive-strength = <2>;
    > + bias-pull-down;
    > + };
    s/sde/mdss as per Dmitry's recent request

    Konrad
    > +
    > };
    >
    > &usb3 {
    >

    \
     
     \ /
      Last update: 2023-06-24 04:07    [W:4.135 / U:0.144 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site