lkml.org 
[lkml]   [2023]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 33/45] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x7
Date
Add sam9x7 bindings.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
Documentation/devicetree/bindings/usb/atmel-usb.txt | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 12183ef47ee4..6359af0123bf 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -3,8 +3,8 @@ Atmel SOC USB controllers
OHCI

Required properties:
- - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
- used in host mode.
+ - compatible: Should be "atmel,at91rm9200-ohci" or "microchip,sam9x7-ohci"
+ for USB controllers used in host mode.
- reg: Address and length of the register set for the device
- interrupts: Should contain ohci interrupt
- clocks: Should reference the peripheral, host and system clocks
@@ -30,8 +30,8 @@ usb0: ohci@500000 {
EHCI

Required properties:
- - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
- used in host mode.
+ - compatible: Should be "atmel,at91sam9g45-ehci" or "microchip,sam9x7-ehci"
+ for USB controllers used in host mode.
- reg: Address and length of the register set for the device
- interrupts: Should contain ehci interrupt
- clocks: Should reference the peripheral and the UTMI clocks
@@ -87,6 +87,7 @@ Required properties:
"atmel,at91sam9g45-udc"
"atmel,sama5d3-udc"
"microchip,sam9x60-udc"
+ "microchip,sam9x7-udc"
"microchip,lan9662-udc"
For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
is required.
--
2.25.1
\
 
 \ /
  Last update: 2023-06-23 22:50    [W:0.569 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site