lkml.org 
[lkml]   [2023]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/3] can: length: refactor frame lengths definition to add size in bits
On Thu. 1 juin 2023 at19:42, <Thomas.Kopp@microchip.com> wrote:
> > Introduce a method to calculate the exact size in bits of a CAN(-FD)
> > frame with or without dynamic bitsuffing.
> >
> > These are all the possible combinations taken into account:
> >
> > - Classical CAN or CAN-FD
> > - Standard or Extended frame format
> > - CAN-FD CRC17 or CRC21
> > - Include or not intermission
> >
> > Instead of doing several individual macro definitions, declare the
> > can_frame_bits() function-like macro. To this extent, do a full
> > refactoring of the length definitions.
> >
> > In addition add the can_frame_bytes(). This function-like macro
> > replaces the existing macro:
> >
> > - CAN_FRAME_OVERHEAD_SFF: can_frame_bytes(false, false, 0)
> > - CAN_FRAME_OVERHEAD_EFF: can_frame_bytes(false, true, 0)
> > - CANFD_FRAME_OVERHEAD_SFF: can_frame_bytes(true, false, 0)
> > - CANFD_FRAME_OVERHEAD_EFF: can_frame_bytes(true, true, 0)
> >
> > The different maximum frame lengths (maximum data length, including
> > intermission) are as follow:
> >
> > Frame type bits bytes
> > -------------------------------------------------------
> > Classic CAN SFF no-bitstuffing 111 14
> > Classic CAN EFF no-bitstuffing 131 17
> > Classic CAN SFF bitstuffing 135 17
> > Classic CAN EFF bitstuffing 160 20
> > CAN-FD SFF no-bitstuffing 579 73
> > CAN-FD EFF no-bitstuffing 598 75
> > CAN-FD SFF bitstuffing 712 89
> > CAN-FD EFF bitstuffing 736 92
> >
> > The macro CAN_FRAME_LEN_MAX and CANFD_FRAME_LEN_MAX are kept as
> > an
> > alias to, respectively, can_frame_bytes(false, true, CAN_MAX_DLEN) and
> > can_frame_bytes(true, true, CANFD_MAX_DLEN).
> >
> > In addition to the above:
> >
> > - Use ISO 11898-1:2015 definitions for the name of the CAN frame
> > fields.
> > - Include linux/bits.h for use of BITS_PER_BYTE.
> > - Include linux/math.h for use of mult_frac() and
> > DIV_ROUND_UP(). N.B: the use of DIV_ROUND_UP() is not new to this
> > patch, but the include was previously omitted.
> > - Add copyright 2023 for myself.
> >
> > Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> > ---
> > drivers/net/can/dev/length.c | 15 +-
> > include/linux/can/length.h | 298 +++++++++++++++++++++++++----------
> > 2 files changed, 213 insertions(+), 100 deletions(-)
> >
> > diff --git a/drivers/net/can/dev/length.c b/drivers/net/can/dev/length.c
> > index b48140b1102e..b7f4d76dd444 100644
> > --- a/drivers/net/can/dev/length.c
> > +++ b/drivers/net/can/dev/length.c
> > @@ -78,18 +78,7 @@ unsigned int can_skb_get_frame_len(const struct
> > sk_buff *skb)
> > else
> > len = cf->len;
> >
> > - if (can_is_canfd_skb(skb)) {
> > - if (cf->can_id & CAN_EFF_FLAG)
> > - len += CANFD_FRAME_OVERHEAD_EFF;
> > - else
> > - len += CANFD_FRAME_OVERHEAD_SFF;
> > - } else {
> > - if (cf->can_id & CAN_EFF_FLAG)
> > - len += CAN_FRAME_OVERHEAD_EFF;
> > - else
> > - len += CAN_FRAME_OVERHEAD_SFF;
> > - }
> > -
> > - return len;
> > + return can_frame_bytes(can_is_canfd_skb(skb), cf->can_id &
> > CAN_EFF_FLAG,
> > + false, len);
> > }
> > EXPORT_SYMBOL_GPL(can_skb_get_frame_len);
> > diff --git a/include/linux/can/length.h b/include/linux/can/length.h
> > index 521fdbce2d69..ef6e78fa95b9 100644
> > --- a/include/linux/can/length.h
> > +++ b/include/linux/can/length.h
> > @@ -1,132 +1,256 @@
> > /* SPDX-License-Identifier: GPL-2.0 */
> > /* Copyright (C) 2020 Oliver Hartkopp <socketcan@hartkopp.net>
> > * Copyright (C) 2020 Marc Kleine-Budde <kernel@pengutronix.de>
> > - * Copyright (C) 2020 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> > + * Copyright (C) 2020, 2023 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> > */
> >
> > #ifndef _CAN_LENGTH_H
> > #define _CAN_LENGTH_H
> >
> > +#include <linux/bits.h>
> > #include <linux/can.h>
> > #include <linux/can/netlink.h>
> > +#include <linux/math.h>
> >
> > /*
> > - * Size of a Classical CAN Standard Frame
> > + * Size of a Classical CAN Standard Frame header in bits
> > *
> > - * Name of Field Bits
> > + * Name of Field Bits
> > * ---------------------------------------------------------
> > - * Start-of-frame 1
> > - * Identifier 11
> > - * Remote transmission request (RTR) 1
> > - * Identifier extension bit (IDE) 1
> > - * Reserved bit (r0) 1
> > - * Data length code (DLC) 4
> > - * Data field 0...64
> > - * CRC 15
> > - * CRC delimiter 1
> > - * ACK slot 1
> > - * ACK delimiter 1
> > - * End-of-frame (EOF) 7
> > - * Inter frame spacing 3
> > + * Start Of Frame (SOF) 1
> > + * Arbitration field:
> > + * base ID 11
> > + * Remote Transmission Request (RTR) 1
> > + * Control field:
> > + * IDentifier Extension bit (IDE) 1
> > + * FD Format indicatior (FDF) 1
> > + * Data Length Code (DLC) 4
> > + *
> > + * including all fields preceding the data field, ignoring bitstuffing
> > + */
> > +#define CAN_FRAME_HEADER_SFF_BITS 19
> > +
> > +/*
> > + * Size of a Classical CAN Extended Frame header in bits
> > + *
> > + * Name of Field Bits
> > + * ---------------------------------------------------------
> > + * Start Of Frame (SOF) 1
> > + * Arbitration field:
> > + * base ID 11
> > + * Substitute Remote Request (SRR) 1
> > + * IDentifier Extension bit (IDE) 1
> > + * ID extension 18
> > + * Remote Transmission Request (RTR) 1
> > + * Control field:
> > + * FD Format indicatior (FDF) 1
> Nit: indicator, same above

ACK.

> > + * Reserved bit (r0) 1
> > + * Data length code (DLC) 4
> > + *
> > + * including all fields preceding the data field, ignoring bitstuffing
> > + */
> > +#define CAN_FRAME_HEADER_EFF_BITS 39
> > +
> > +/*
> > + * Size of a CAN-FD Standard Frame in bits
> > + *
> > + * Name of Field Bits
> > + * ---------------------------------------------------------
> > + * Start Of Frame (SOF) 1
> > + * Arbitration field:
> > + * base ID 11
> > + * Remote Request Substitution (RRS) 1
> > + * Control field:
> > + * IDentifier Extension bit (IDE) 1
> > + * FD Format indicator (FDF) 1
> > + * Reserved bit (res) 1
> > + * Bit Rate Switch (BRS) 1
> > + * Error Status Indicator (ESI) 1
> > + * Data length code (DLC) 4
> > + *
> > + * including all fields preceding the data field, ignoring bitstuffing
> > + */
> > +#define CANFD_FRAME_HEADER_SFF_BITS 22
> > +
> > +/*
> > + * Size of a CAN-FD Extended Frame in bits
> > + *
> > + * Name of Field Bits
> > + * ---------------------------------------------------------
> > + * Start Of Frame (SOF) 1
> > + * Arbitration field:
> > + * base ID 11
> > + * Substitute Remote Request (SRR) 1
> > + * IDentifier Extension bit (IDE) 1
> > + * ID extension 18
> > + * Remote Request Substitution (RRS) 1
> > + * Control field:
> > + * FD Format indicator (FDF) 1
> > + * Reserved bit (res) 1
> > + * Bit Rate Switch (BRS) 1
> > + * Error Status Indicator (ESI) 1
> > + * Data length code (DLC) 4
> > *
> > - * rounded up and ignoring bitstuffing
> > + * including all fields preceding the data field, ignoring bitstuffing
> > */
> > -#define CAN_FRAME_OVERHEAD_SFF DIV_ROUND_UP(47, 8)
> > +#define CANFD_FRAME_HEADER_EFF_BITS 41
> >
> > /*
> > - * Size of a Classical CAN Extended Frame
> > + * Size of a CAN CRC Field in bits
> > *
> > * Name of Field Bits
> > * ---------------------------------------------------------
> > - * Start-of-frame 1
> > - * Identifier A 11
> > - * Substitute remote request (SRR) 1
> > - * Identifier extension bit (IDE) 1
> > - * Identifier B 18
> > - * Remote transmission request (RTR) 1
> > - * Reserved bits (r1, r0) 2
> > - * Data length code (DLC) 4
> > - * Data field 0...64
> > - * CRC 15
> > - * CRC delimiter 1
> > - * ACK slot 1
> > - * ACK delimiter 1
> > - * End-of-frame (EOF) 7
> > - * Inter frame spacing 3
> > + * CRC sequence (CRC15) 15
> > + * CRC Delimiter 1
> > *
> > - * rounded up and ignoring bitstuffing
> > + * ignoring bitstuffing
> > */
> > -#define CAN_FRAME_OVERHEAD_EFF DIV_ROUND_UP(67, 8)
> > +#define CAN_FRAME_CRC_FIELD_BITS 16
> >
> > /*
> > - * Size of a CAN-FD Standard Frame
> > + * Size of a CAN-FD CRC17 Field in bits (length: 0..16)
> > *
> > * Name of Field Bits
> > * ---------------------------------------------------------
> > - * Start-of-frame 1
> > - * Identifier 11
> > - * Remote Request Substitution (RRS) 1
> > - * Identifier extension bit (IDE) 1
> > - * Flexible data rate format (FDF) 1
> > - * Reserved bit (r0) 1
> > - * Bit Rate Switch (BRS) 1
> > - * Error Status Indicator (ESI) 1
> > - * Data length code (DLC) 4
> > - * Data field 0...512
> > - * Stuff Bit Count (SBC) 4
> > - * CRC 0...16: 17 20...64:21
> > - * CRC delimiter (CD) 1
> > - * Fixed Stuff bits (FSB) 0...16: 6 20...64:7
> > - * ACK slot (AS) 1
> > - * ACK delimiter (AD) 1
> > - * End-of-frame (EOF) 7
> > - * Inter frame spacing 3
> > - *
> > - * assuming CRC21, rounded up and ignoring dynamic bitstuffing
> > - */
> > -#define CANFD_FRAME_OVERHEAD_SFF DIV_ROUND_UP(67, 8)
> > + * Stuff Count 4
> > + * CRC Sequence (CRC17) 17
> > + * CRC Delimiter 1
> > + * Fixed stuff bits 6
> > + */
> > +#define CANFD_FRAME_CRC17_FIELD_BITS 28
> >
> > /*
> > - * Size of a CAN-FD Extended Frame
> > + * Size of a CAN-FD CRC21 Field in bits (length: 20..64)
> > *
> > * Name of Field Bits
> > * ---------------------------------------------------------
> > - * Start-of-frame 1
> > - * Identifier A 11
> > - * Substitute remote request (SRR) 1
> > - * Identifier extension bit (IDE) 1
> > - * Identifier B 18
> > - * Remote Request Substitution (RRS) 1
> > - * Flexible data rate format (FDF) 1
> > - * Reserved bit (r0) 1
> > - * Bit Rate Switch (BRS) 1
> > - * Error Status Indicator (ESI) 1
> > - * Data length code (DLC) 4
> > - * Data field 0...512
> > - * Stuff Bit Count (SBC) 4
> > - * CRC 0...16: 17 20...64:21
> > - * CRC delimiter (CD) 1
> > - * Fixed Stuff bits (FSB) 0...16: 6 20...64:7
> > - * ACK slot (AS) 1
> > - * ACK delimiter (AD) 1
> > - * End-of-frame (EOF) 7
> > - * Inter frame spacing 3
> > - *
> > - * assuming CRC21, rounded up and ignoring dynamic bitstuffing
> > - */
> > -#define CANFD_FRAME_OVERHEAD_EFF DIV_ROUND_UP(86, 8)
> > + * Stuff Count 4
> > + * CRC sequence (CRC21) 21
> > + * CRC Delimiter 1
> > + * Fixed stuff bits 7
> > + */
> > +#define CANFD_FRAME_CRC21_FIELD_BITS 33
> > +
> > +/*
> > + * Size of a CAN(-FD) Frame footer in bits
> > + *
> > + * Name of Field Bits
> > + * ---------------------------------------------------------
> > + * ACK slot 1
> > + * ACK delimiter 1
> > + * End Of Frame (EOF) 7
> > + *
> > + * including all fields following the CRC field
> > + */
> > +#define CAN_FRAME_FOOTER_BITS 9
> > +
> > +/*
> > + * First part of the Inter Frame Space
> > + * (a.k.a. IMF - intermission field)
> > + */
> > +#define CAN_INTERMISSION_BITS 3
> > +
> > +/**
> > + * can_bitstuffing_len() - Calculate the maximum length with bitsuffing
> Nit: bitstuffing, same further down

ACK.

> > + * @bitstream_len: length of a destuffed bit stream
> > + *
> > + * The worst bit stuffing case is a sequence in which dominant and
> > + * recessive bits alternate every four bits:
> > + *
> > + * Destuffed: 1 1111 0000 1111 0000 1111
> > + * Stuffed: 1 1111o 0000i 1111o 0000i 1111o
> > + *
> > + * Nomenclature
> > + *
> > + * - "0": dominant bit
> > + * - "o": dominant stuff bit
> > + * - "1": recessive bit
> > + * - "i": recessive stuff bit
> > + *
> > + * Aside of the first bit, one stuff bit is added every four bits.
> > + *
> > + * Return: length of the stuffed bit stream in the worst case scenario.
> > + */
> > +#define can_bitstuffing_len(destuffed_len) \
> > + (destuffed_len + (destuffed_len - 1) / 4)
> > +
> > +#define __can_bitstuffing_len(bitstuffing, destuffed_len) \
> > + (bitstuffing ? can_bitstuffing_len(destuffed_len) : \
> > + destuffed_len)
> > +
> > +#define __can_cc_frame_bits(is_eff, bitstuffing, \
> > + intermission, data_len) \
> > +( \
> > + __can_bitstuffing_len(bitstuffing, \
> > + (is_eff ? CAN_FRAME_HEADER_EFF_BITS : \
> > + CAN_FRAME_HEADER_SFF_BITS) + \
> > + data_len * BITS_PER_BYTE + \
> > + CAN_FRAME_CRC_FIELD_BITS) + \
> > + CAN_FRAME_FOOTER_BITS + \
> > + (intermission ? CAN_INTERMISSION_BITS : 0) \
> > +)
> I think Footer and Intermission need to be pulled out of the parameter for __can_bitstuffing_length as these fields are never stuffed.

Look again at the opening and closing bracket of
__can_bitstuffing_len(). These are already out :)
I indented the parameters of __can_bitstuffing_length() to highlight
what is in and out.

Maybe adding some newlines would help readability? Something like that:

#define __can_cc_frame_bits(is_eff, bitstuffing, \
intermission, data_len) \
( \
__can_bitstuffing_len( \
bitstuffing, \
(is_eff ? CAN_FRAME_HEADER_EFF_BITS : \
CAN_FRAME_HEADER_SFF_BITS) + \
data_len * BITS_PER_BYTE + \
CAN_FRAME_CRC_FIELD_BITS) \
+ \
CAN_FRAME_FOOTER_BITS + \
(intermission ? CAN_INTERMISSION_BITS : 0) \
)

> > +
> > +#define __can_fd_frame_bits(is_eff, bitstuffing, \
> > + intermission, data_len) \
> > +( \
> > + __can_bitstuffing_len(bitstuffing, \
> > + (is_eff ? CANFD_FRAME_HEADER_EFF_BITS : \
> > + CANFD_FRAME_HEADER_SFF_BITS) + \
> > + data_len * BITS_PER_BYTE) + \
> > + (data_len <= 16 ? \
> > + CANFD_FRAME_CRC17_FIELD_BITS : \
> > + CANFD_FRAME_CRC21_FIELD_BITS) + \
> > + CAN_FRAME_FOOTER_BITS + \
> > + (intermission ? CAN_INTERMISSION_BITS : 0) \
> > +)
> I think Footer and Intermission need to be pulled out of the parameter for __can_bitstuffing_length as these fields are never stuffed.
> The CAN_FRAME_CRC_FIELD_BITS bits need to be pulled out of the can_bitstuffing_len. That portion of the Frame is not dynamically stuffed in FD frames.

Same as above, these are already out.

> > +
> > +/**
> > + * can_frame_bits() - Calculate the number of bits in on the wire in a
> Nit: "in on the wire" -in
> > + * CAN frame
> > + * @is_fd: true: CAN-FD frame; false: Classical CAN frame.
> > + * @is_eff: true: Extended frame; false: Standard frame.
> > + * @bitstuffing: true: calculate the bitsuffing worst case; false:
> > + * calculate the bitsuffing best case (no dynamic
> > + * bitsuffing). Fixed stuff bits are always included.
> > + * @intermission: if and only if true, include the inter frame space
> > + * assuming no bus idle (i.e. only the intermission gets added).
> > + * @data_len: length of the data field in bytes. Correspond to
> > + * can(fd)_frame->len. Should be zero for remote frames. No
> > + * sanitization is done on @data_len.
> > + *
> > + * Return: the numbers of bits on the wire of a CAN frame.
> > + */
> > +#define can_frame_bits(is_fd, is_eff, bitstuffing, \
> > + intermission, data_len) \
> > +( \
> > + is_fd ? __can_fd_frame_bits(is_eff, bitstuffing, \
> > + intermission, data_len) : \
> > + __can_cc_frame_bits(is_eff, bitstuffing, \
> > + intermission, data_len) \
> > +)
> > +
> > +/*
> > + * Number of bytes in a CAN frame
> > + * (rounded up, including intermission)
> > + */
> > +#define can_frame_bytes(is_fd, is_eff, bitstuffing, data_len) \
> > + DIV_ROUND_UP(can_frame_bits(is_fd, is_eff, bitstuffing, \
> > + true, data_len), \
> > + BITS_PER_BYTE)
> >
> > /*
> > * Maximum size of a Classical CAN frame
> > - * (rounded up and ignoring bitstuffing)
> > + * (rounded up, ignoring bitstuffing but including intermission)
> > */
> > -#define CAN_FRAME_LEN_MAX (CAN_FRAME_OVERHEAD_EFF +
> > CAN_MAX_DLEN)
> > +#define CAN_FRAME_LEN_MAX \
> > + can_frame_bytes(false, true, false, CAN_MAX_DLEN)
> >
> > /*
> > * Maximum size of a CAN-FD frame
> > * (rounded up and ignoring bitstuffing)
> Ignoring dynamic bitstuffing
> > */
> > -#define CANFD_FRAME_LEN_MAX (CANFD_FRAME_OVERHEAD_EFF +
> > CANFD_MAX_DLEN)
> > +#define CANFD_FRAME_LEN_MAX \
> > + can_frame_bytes(true, true, false, CANFD_MAX_DLEN)
> >
> > /*
> > * can_cc_dlc2len(value) - convert a given data length code (dlc) of a
> > --
> > 2.39.3
>
> I think your attribution of suggested-by for myself is mixed up for the patches 2/3 and 3/3 😊

ACK. I will remove it from 2/3 and add it to 3/3.

> For the entire series you can add my reviewed-by.

I will do so.
Thanks for picking my typos!

\
 
 \ /
  Last update: 2023-06-01 13:02    [W:0.132 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site