lkml.org 
[lkml]   [2023]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v8 3/3] dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
Date

On 1/06/23 19:05, Krzysztof Kozlowski wrote:
> On 01/06/2023 01:49, Chris Packham wrote:
>> From: Vadym Kochan <vadym.kochan@plvision.eu>
>>
>> Switch the DT binding to a YAML schema to enable the DT validation.
>>
>> The text binding didn't mention it as a requirement but existing usage
>> has
>>
>> compatible = "marvell,armada-8k-nand-controller",
>> "marvell,armada370-nand-controller";
>>
>> so the YAML allows this in addition to the individual compatible values.
>>
>> There was also an incorrect reference to dma-names being "rxtx" where
>> the driver and existing device trees actually use dma-names = "data" so
>> this is corrected in the conversion.
>>
>> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>>
>> Notes:
>> Changes in v8:
>> - Mark deprecated compatible values as such
>> - Allow "marvell,armada-8k-nand-controller" without
>> "marvell,armada370-nand-controller"
>> - Make dma-names usage reflect reality
>> - Update commit message
>>
>> Changes in v7:
>> - Restore "label" and "partitions" properties (should be picked up via
>> nand-controller.yaml but aren't)
> What do you mean by "aren't"? They are not needed.

I mean I simply cannot make it work and I'm out of ideas (I'm also in an
awkward timezone so it takes 24hrs for me to ask a question and get a
response which leads to me making guesses instead of waiting).

nand-controller.yaml references nand-chip.yaml which references mtd.yaml
which defines the "label" and "partitions" property.

I thought marvell,nand-controller.yaml could just say `$ref:
nand-controller.yaml` and it would mean I'd get all the definitions down
the chain but this doesn't seem to work the way I expect (or more likely
I'm not doing it right). I thought it might have something to do with
the different patternProperties pattern but even when I make that match
what is used in nand-controller.yaml it doesn't seem to pick up those
properties.

>> - Add/restore nand-on-flash-bbt and nand-ecc-mode which aren't covered
>> by nand-controller.yaml.
>> - Use "unevalautedProperties: false"
>> - Corrections for clock-names, dma-names, nand-rb and nand-ecc-strength
>> - Add pxa3xx-nand-controller example
>>
>> Changes in v6:
>> - remove properties covered by nand-controller.yaml
>> - add example using armada-8k compatible
>>
>> earlier changes:
>>
>> v5:
>> 1) Get back "label" and "partitions" properties but without
>> ref to the "partition.yaml" which was wrongly used.
>>
>> 2) Add "additionalProperties: false" for nand@ because all possible
>> properties are described.
>>
>> v4:
>> 1) Remove "label" and "partitions" properties
>>
>> 2) Use 2 clocks for A7K/8K platform which is a requirement
>>
>> v3:
>> 1) Remove txt version from the MAINTAINERS list
>>
>> 2) Use enum for some of compatible strings
>>
>> 3) Drop:
>> #address-cells
>> #size-cells:
>>
>> as they are inherited from the nand-controller.yaml
>>
>> 4) Add restriction to use 2 clocks for A8K SoC
>>
>> 5) Dropped description for clock-names and extend it with
>> minItems: 1
>>
>> 6) Drop description for "dmas"
>>
>> 7) Use "unevalautedProperties: false"
>>
>> 8) Drop quites from yaml refs.
>>
>> 9) Use 4-space indentation for the example section
>>
>> v2:
>> 1) Fixed warning by yamllint with incorrect indentation for compatible list
>>
>> .../bindings/mtd/marvell,nand-controller.yaml | 223 ++++++++++++++++++
>> .../devicetree/bindings/mtd/marvell-nand.txt | 126 ----------
>> MAINTAINERS | 1 -
>> 3 files changed, 223 insertions(+), 127 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
>> delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
>> new file mode 100644
>> index 000000000000..433feb430555
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
>> @@ -0,0 +1,223 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://scanmail.trustwave.com/?c=20988&d=18P45NWaR4V6pXt_kuivNCiVAXCm3C7MEF-_8xrP2A&u=http%3a%2f%2fdevicetree%2eorg%2fschemas%2fmtd%2fmarvell%2cnand-controller%2eyaml%23
>> +$schema: http://scanmail.trustwave.com/?c=20988&d=18P45NWaR4V6pXt_kuivNCiVAXCm3C7MEFvq8B-ZjQ&u=http%3a%2f%2fdevicetree%2eorg%2fmeta-schemas%2fcore%2eyaml%23
>> +
>> +title: Marvell NAND Flash Controller (NFC)
>> +
>> +maintainers:
>> + - Miquel Raynal <miquel.raynal@bootlin.com>
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - items:
>> + - const: marvell,armada-8k-nand-controller
>> + - const: marvell,armada370-nand-controller
>> + - enum:
>> + - marvell,armada-8k-nand-controller
>> + - marvell,armada370-nand-controller
>> + - marvell,pxa3xx-nand-controller
>> + - description: legacy bindings
>> + deprecated: true
>> + enum:
>> + - marvell,armada-8k-nand
>> + - marvell,armada370-nand
>> + - marvell,pxa3xx-nand
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clocks:
>> + description:
>> + Shall reference the NAND controller clocks, the second one is
>> + is only needed for the Armada 7K/8K SoCs
>> + minItems: 1
>> + maxItems: 2
>> +
>> + clock-names:
>> + minItems: 1
>> + items:
>> + - const: core
>> + - const: reg
>> +
>> + dmas:
>> + maxItems: 1
>> +
>> + dma-names:
>> + items:
>> + - const: data
>> +
>> + marvell,system-controller:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: Syscon node that handles NAND controller related registers
>> +
>> +patternProperties:
>> + "^nand@[0-3]$":
>> + type: object
>> + unevaluatedProperties: false
>> + properties:
>> + reg:
>> + minimum: 0
>> + maximum: 3
>> +
>> + nand-rb:
>> + minItems: 1
> Drop minItems.
>
>> + maxItems: 1
> Didn't you have here minimum and maximum? I think I did not ask to
> remove them.
>
>> +
>> + nand-ecc-step-size:
>> + const: 512
>> +
>> + nand-ecc-strength:
>> + enum: [1, 4, 8, 12, 16]
>> +
>> + nand-on-flash-bbt:
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + nand-ecc-mode:
>> + const: hw
>> +
>> + label:
>> + $ref: /schemas/types.yaml#/definitions/string
> Drop label
>
>> +
>> + partitions:
>> + type: object
> Drop partitions.
>
>> +
>> + marvell,nand-keep-config:
>> + description: |
>> + Orders the driver not to take the timings from the core and
>> + leaving them completely untouched. Bootloader timings will then
>> + be used.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + marvell,nand-enable-arbiter:
>> + description: |
>> + To enable the arbiter, all boards blindly used it,
>> + this bit was set by the bootloader for many boards and even if
>> + it is marked reserved in several datasheets, it might be needed to set
>> + it (otherwise it is harmless).
>> + $ref: /schemas/types.yaml#/definitions/flag
>> + deprecated: true
>> +
>> + additionalProperties: false
> unevaluatedProperties: false
>
>> +
>> + required:
>> + - reg
>> + - nand-rb
>> +
> required: block goes here
>
>> +allOf:
>> + - $ref: nand-controller.yaml
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: marvell,pxa3xx-nand-controller
>> + then:
>> + required:
>> + - dmas
>> + - dma-names
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: marvell,armada-8k-nand-controller
>> + then:
>> + properties:
>> + clocks:
>> + minItems: 2
>> +
>> + clock-names:
>> + minItems: 2
>> +
>> + required:
>> + - marvell,system-controller
>> +
>
> Best regards,
> Krzysztof
>
\
 
 \ /
  Last update: 2023-06-01 23:07    [W:0.100 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site