lkml.org 
[lkml]   [2023]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] drm/stm: add an option to change FB bpp
Date
Boards that use the STM32F{4,7} series have limited amounts of RAM. The
added parameter allows users to size, within certain limits, the memory
footprint required by the framebuffer.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

drivers/gpu/drm/stm/drv.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 422220df7d8c..65be2b442a6a 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -30,6 +30,11 @@
#define STM_MAX_FB_WIDTH 2048
#define STM_MAX_FB_HEIGHT 2048 /* same as width to handle orientation */

+static uint stm_bpp = 16;
+
+MODULE_PARM_DESC(bpp, "bits-per-pixel (default: 16)");
+module_param_named(bpp, stm_bpp, uint, 0644);
+
static const struct drm_mode_config_funcs drv_mode_config_funcs = {
.fb_create = drm_gem_fb_create,
.atomic_check = drm_atomic_helper_check,
@@ -93,6 +98,7 @@ static int drv_load(struct drm_device *ddev)
ddev->mode_config.min_height = 0;
ddev->mode_config.max_width = STM_MAX_FB_WIDTH;
ddev->mode_config.max_height = STM_MAX_FB_HEIGHT;
+ ddev->mode_config.preferred_depth = stm_bpp;
ddev->mode_config.funcs = &drv_mode_config_funcs;
ddev->mode_config.normalize_zpos = true;

@@ -203,7 +209,7 @@ static int stm_drm_platform_probe(struct platform_device *pdev)
if (ret)
goto err_put;

- drm_fbdev_dma_setup(ddev, 16);
+ drm_fbdev_dma_setup(ddev, stm_bpp);

return 0;

--
2.32.0
\
 
 \ /
  Last update: 2023-06-01 19:04    [W:0.075 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site