lkml.org 
[lkml]   [2023]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 8/9] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
From


On 3.05.2023 05:55, Krishna Kurapati PSSNV wrote:
>
>
> On 5/2/2023 4:36 PM, Konrad Dybcio wrote:
>>
>>
>> On 1.05.2023 16:34, Krishna Kurapati wrote:
>>> Enable tertiary controller for SA8295P (based on SC8280XP).
>>> Add pinctrl support for usb ports to provide VBUS to connected peripherals.
>>>
>>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++
>>>   1 file changed, 47 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>>> index fd253942e5e5..7e6061c43835 100644
>>> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>>> @@ -584,6 +584,19 @@ &usb_1_qmpphy {
>>>       status = "okay";
>>>   };
>>>   +&usb_2 {
>>> +    pinctrl-names = "default";
>>> +    pinctrl-0 = <&usb2_en_state>,
>>> +            <&usb3_en_state>,
>>> +            <&usb4_en_state>,
>>> +            <&usb5_en_state>;
>> This is misaligned. Also, please do property-n before property-names.
>>
>>> +    status = "okay";
>>> +};
>>> +
>>> +&usb_2_dwc3 {
>>> +    dr_mode = "host";
>>> +};
>>> +
>>>   &usb_2_hsphy0 {
>>>       vdda-pll-supply = <&vreg_l5a>;
>>>       vdda18-supply = <&vreg_l7g>;
>>> @@ -729,3 +742,37 @@ wake-n-pins {
>>>           };
>>>       };
>>>   };
>>> +
>>> +&pmm8540c_gpios {
>>> +    usb2_en_state: usb2-en-state {
>>> +        pins = "gpio9";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>> No drive-strength values?
>>
>> Konrad
>
> Hi Konrad,
>
>  TBH, I didn't add the drive strength values as things worked out of the box with the current changes (may be the default value of drive strength is sufficient for us).
>
> Let me know if it is mandatory, I will add it up in the next version.
It's not, but it helps eliminate one more potential inconsistency

Konrad
>
> Regards,
> Krishna,
>
>>> +    };
>>> +};
>>> +
>>> +&pmm8540e_gpios {
>>> +    usb3_en_state: usb3-en-state {
>>> +        pins = "gpio5";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>>> +    };
>>> +};
>>> +
>>> +&pmm8540g_gpios {
>>> +    usb4_en_state: usb4-en-state {
>>> +        pins = "gpio5";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>>> +    };
>>> +
>>> +    usb5_en_state: usb5-en-state {
>>> +        pins = "gpio9";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>>> +    };
>>> +};

\
 
 \ /
  Last update: 2023-05-04 08:38    [W:0.053 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site