lkml.org 
[lkml]   [2023]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 2/4] mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767
Date
From: Victor Shih <victor.shih@genesyslogic.com.tw>

Set GL9767 SDR104's clock to 205MHz and enable SSC feature
depend on register 0x888 BIT(1).

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci-gli.c | 135 ++++++++++++++++++++++++++++++-
1 file changed, 134 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 3ed207b89d1a..392a106cea18 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -158,6 +158,12 @@
#define GLI_9767_VHS_REV_M 0x1
#define GLI_9767_VHS_REV_W 0x2

+#define PCIE_GLI_9767_COM_MAILBOX 0x888
+#define PCIE_GLI_9767_COM_MAILBOX_SSC_EN BIT(1)
+
+#define PCIE_GLI_9767_CFG 0x8A0
+#define PCIE_GLI_9767_CFG_LOW_PWR_OFF BIT(12)
+
#define PCIE_GLI_9767_PWR_MACRO_CTL 0x8D0
#define PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE GENMASK(3, 0)
#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE GENMASK(15, 12)
@@ -175,6 +181,16 @@
#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21)
#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30)

+#define PCIE_GLI_9767_SD_PLL_CTL 0x938
+#define PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV GENMASK(9, 0)
+#define PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV GENMASK(15, 12)
+#define PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN BIT(16)
+#define PCIE_GLI_9767_SD_PLL_CTL_SSC_EN BIT(19)
+#define PCIE_GLI_9767_SD_PLL_CTL_SSC_STEP_SETTING GENMASK(28, 24)
+
+#define PCIE_GLI_9767_SD_PLL_CTL2 0x93C
+#define PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM GENMASK(31, 16)
+
#define GLI_MAX_TUNING_LOOP 40

/* Genesys Logic chipset */
@@ -753,6 +769,123 @@ static inline void gl9767_vhs_write(struct pci_dev *pdev)
pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
}

+static bool gl9767_ssc_enable(struct pci_dev *pdev)
+{
+ u32 value;
+ u8 enable;
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_COM_MAILBOX, &value);
+ enable = FIELD_GET(PCIE_GLI_9767_COM_MAILBOX_SSC_EN, value);
+
+ gl9767_vhs_read(pdev);
+
+ return enable;
+}
+
+static void gl9767_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm)
+{
+ u32 pll;
+ u32 ssc;
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, &pll);
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL2, &ssc);
+ pll &= ~(PCIE_GLI_9767_SD_PLL_CTL_SSC_STEP_SETTING |
+ PCIE_GLI_9767_SD_PLL_CTL_SSC_EN);
+ ssc &= ~PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM;
+ pll |= FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_SSC_STEP_SETTING, step) |
+ FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_SSC_EN, enable);
+ ssc |= FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM, ppm);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL2, ssc);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, pll);
+
+ gl9767_vhs_read(pdev);
+}
+
+static void gl9767_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv)
+{
+ u32 pll;
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, &pll);
+ pll &= ~(PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV |
+ PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV |
+ PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN);
+ pll |= FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV, ldiv) |
+ FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV, pdiv) |
+ FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN, dir);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, pll);
+
+ gl9767_vhs_read(pdev);
+
+ /* wait for pll stable */
+ msleep(1);
+}
+
+static void gl9767_set_ssc_pll_205mhz(struct pci_dev *pdev)
+{
+ bool enable = gl9767_ssc_enable(pdev);
+
+ /* set pll to 205MHz and ssc */
+ gl9767_set_ssc(pdev, enable, 0x1F, 0xF5C3);
+ gl9767_set_pll(pdev, 0x1, 0x246, 0x0);
+}
+
+static void gl9767_disable_ssc_pll(struct pci_dev *pdev)
+{
+ u32 pll;
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, &pll);
+ pll &= ~(PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN | PCIE_GLI_9767_SD_PLL_CTL_SSC_EN);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, pll);
+
+ gl9767_vhs_read(pdev);
+}
+
+static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct mmc_ios *ios = &host->mmc->ios;
+ struct pci_dev *pdev;
+ u32 value;
+ u16 clk;
+
+ pdev = slot->chip->pdev;
+ host->mmc->actual_clock = 0;
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
+ value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
+
+ gl9767_disable_ssc_pll(pdev);
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
+ host->mmc->actual_clock = 205000000;
+ gl9767_set_ssc_pll_205mhz(pdev);
+ }
+
+ sdhci_enable_clk(host, clk);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
+ value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
+
+ gl9767_vhs_read(pdev);
+}
+
static void gli_set_9767(struct sdhci_host *host)
{
u32 value;
@@ -1293,7 +1426,7 @@ const struct sdhci_pci_fixes sdhci_gl9763e = {
};

static const struct sdhci_ops sdhci_gl9767_ops = {
- .set_clock = sdhci_set_clock,
+ .set_clock = sdhci_gl9767_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_gl9767_reset,
--
2.25.1
\
 
 \ /
  Last update: 2023-05-31 13:18    [W:0.070 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site