lkml.org 
[lkml]   [2023]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110
On Thu, May 25, 2023 at 10:36:38PM +0100, Conor Dooley wrote:
> Greg,
>
> On Thu, May 18, 2023 at 07:27:50PM +0800, Minda Chen wrote:
> > Add USB wrapper layer and Cadence USB3 controller dts
> > configuration for StarFive JH7110 SoC and VisionFive2
> > Board.
> > USB controller connect to PHY, The PHY dts configuration
> > are also added.
> >
> > Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>
> > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > index 71a8e9acbe55..b65f06c5b1b7 100644
> > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > @@ -366,6 +366,59 @@
> > status = "disabled";
> > };
> >
> > + usb0: usb@10100000 {
> > + compatible = "starfive,jh7110-usb";
> > + ranges = <0x0 0x0 0x10100000 0x100000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + starfive,stg-syscon = <&stg_syscon 0x4>;
> > + clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
>
> Please don't pick this patch, if the rest of the series is applicable,
> as this will break building the dtb as stgcrg does not yet exist in any
> maintainer tree.

Ok, I'll just take patch 6/7 then.

thanks,

greg k-h

\
 
 \ /
  Last update: 2023-05-29 16:47    [W:0.054 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site