lkml.org 
[lkml]   [2023]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 11/11] KVM: riscv: selftests: Add get-reg-list test
On Mon, May 29, 2023 at 3:08 PM Andrew Jones <ajones@ventanamicro.com> wrote:
>
> On Sat, May 27, 2023 at 12:39:57PM +0800, Haibo Xu wrote:
> > On Fri, May 26, 2023 at 1:18 AM Andrew Jones <ajones@ventanamicro.com> wrote:
> > >
> > > On Thu, May 25, 2023 at 03:38:35PM +0800, Haibo Xu wrote:
> ...
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.a6),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.a7),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s2),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s3),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s4),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s5),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s6),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s7),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s8),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s9),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s10),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.s11),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.t3),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.t4),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.t5),
> > > > + KVM_REG_RISCV | KVM_REG_SIZE_U64 | KVM_REG_RISCV_CORE | KVM_REG_RISCV_CORE_REG(regs.t6),
> > >
> > > ...all the above would just be indices rather than named registers. I
> > > guess that's better for these registers.
> > >
> >
> > You mean to show it as KVM_REG_RISCV_CORE_REG(regs.regs[0]) ...
> > KVM_REG_RISCV_CORE_REG(regs.regs[31])?
> >
>
> I'm OK with these registers using their names in this list, it does look
> better. However the original idea for these lists was that they would be
> generated from print_reg(). In this case, print_reg() is generating them
> with their number instead of name. Either print_reg() could learn how to
> generate their names by handling the offset ranges of each register type,
> e.g.
>
> switch (reg_off) {
> case 10 ... 17:
> strdup_printf("... KVM_REG_RISCV_CORE_REG(regs.a%d),", reg_off - 10);
>
> or we can use the numbers here in this list, or we can leave it as you
> have it (i.e. done manually).
>

I agree that the print_reg() should print the register name instead of
the register offset.
It may be better to manually encode/decode the register offset to name
case by case
in the print_reg() since we just need to handle it once. Will update it in v3.

Thanks,
Haibo

> Thanks,
> drew

\
 
 \ /
  Last update: 2023-05-29 14:21    [W:0.058 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site