lkml.org 
[lkml]   [2023]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/2] can: j1939: avoid possible use-after-free when j1939_can_rx_register fails
Hi Fedor,

On Fri, May 26, 2023 at 08:19:10PM +0300, Fedor Pchelkin wrote:
> Syzkaller reports the following failure:
>
> BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline]
> BUG: KASAN: use-after-free in j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172
> Write of size 4 at addr ffff888141c15058 by task swapper/3/0
>
> CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.144-syzkaller #0
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
> Call Trace:
> <IRQ>
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x107/0x167 lib/dump_stack.c:118
> print_address_description.constprop.0+0x1c/0x220 mm/kasan/report.c:385
> __kasan_report mm/kasan/report.c:545 [inline]
> kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
> check_memory_region_inline mm/kasan/generic.c:186 [inline]
> check_memory_region+0x145/0x190 mm/kasan/generic.c:192
> instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
> atomic_fetch_sub_release include/asm-generic/atomic-instrumented.h:220 [inline]
> __refcount_sub_and_test include/linux/refcount.h:272 [inline]
> __refcount_dec_and_test include/linux/refcount.h:315 [inline]
> refcount_dec_and_test include/linux/refcount.h:333 [inline]
> kref_put include/linux/kref.h:64 [inline]
> j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172
> j1939_sk_sock_destruct+0x44/0x90 net/can/j1939/socket.c:374
> __sk_destruct+0x4e/0x820 net/core/sock.c:1784
> rcu_do_batch kernel/rcu/tree.c:2485 [inline]
> rcu_core+0xb35/0x1a30 kernel/rcu/tree.c:2726
> __do_softirq+0x289/0x9a3 kernel/softirq.c:298
> asm_call_irq_on_stack+0x12/0x20
> </IRQ>
> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
> run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
> do_softirq_own_stack+0xaa/0xe0 arch/x86/kernel/irq_64.c:77
> invoke_softirq kernel/softirq.c:393 [inline]
> __irq_exit_rcu kernel/softirq.c:423 [inline]
> irq_exit_rcu+0x136/0x200 kernel/softirq.c:435
> sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1095
> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:635
>
> Allocated by task 1141:
> kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
> kasan_set_track mm/kasan/common.c:56 [inline]
> __kasan_kmalloc.constprop.0+0xc9/0xd0 mm/kasan/common.c:461
> kmalloc include/linux/slab.h:552 [inline]
> kzalloc include/linux/slab.h:664 [inline]
> j1939_priv_create net/can/j1939/main.c:131 [inline]
> j1939_netdev_start+0x111/0x860 net/can/j1939/main.c:268
> j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485
> __sys_bind+0x1f2/0x260 net/socket.c:1645
> __do_sys_bind net/socket.c:1656 [inline]
> __se_sys_bind net/socket.c:1654 [inline]
> __x64_sys_bind+0x6f/0xb0 net/socket.c:1654
> do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
> entry_SYSCALL_64_after_hwframe+0x61/0xc6
>
> Freed by task 1141:
> kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
> kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
> kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
> __kasan_slab_free+0x112/0x170 mm/kasan/common.c:422
> slab_free_hook mm/slub.c:1542 [inline]
> slab_free_freelist_hook+0xad/0x190 mm/slub.c:1576
> slab_free mm/slub.c:3149 [inline]
> kfree+0xd9/0x3b0 mm/slub.c:4125
> j1939_netdev_start+0x5ee/0x860 net/can/j1939/main.c:300
> j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485
> __sys_bind+0x1f2/0x260 net/socket.c:1645
> __do_sys_bind net/socket.c:1656 [inline]
> __se_sys_bind net/socket.c:1654 [inline]
> __x64_sys_bind+0x6f/0xb0 net/socket.c:1654
> do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
> entry_SYSCALL_64_after_hwframe+0x61/0xc6
>
> It can be caused by this scenario:
>
> CPU0 CPU1
> j1939_sk_bind(socket0, ndev0, ...)
> j1939_netdev_start()
> j1939_sk_bind(socket1, ndev0, ...)
> j1939_netdev_start()
> mutex_lock(&j1939_netdev_lock)
> j1939_priv_set(ndev0, priv)
> mutex_unlock(&j1939_netdev_lock)
> if (priv_new)
> kref_get(&priv_new->rx_kref)
> return priv_new;
> /* inside j1939_sk_bind() */
> jsk->priv = priv
> j1939_can_rx_register(priv) // fails
> j1939_priv_set(ndev, NULL)
> kfree(priv)
> j1939_sk_sock_destruct()
> j1939_priv_put() // <- uaf
>
> To avoid this, call j1939_can_rx_register() under j1939_netdev_lock so
> that a concurrent thread cannot process j1939_priv before
> j1939_can_rx_register() returns.
>
> Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
>
> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
> ---
> net/can/j1939/main.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c
> index 6ed79afe19a5..ecff1c947d68 100644
> --- a/net/can/j1939/main.c
> +++ b/net/can/j1939/main.c
> @@ -290,16 +290,18 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev)
> return priv_new;
> }
> j1939_priv_set(ndev, priv);
> - mutex_unlock(&j1939_netdev_lock);
>
> ret = j1939_can_rx_register(priv);
> if (ret < 0)
> goto out_priv_put;
>
> + mutex_unlock(&j1939_netdev_lock);
> return priv;
>
> out_priv_put:
> j1939_priv_set(ndev, NULL);
> + mutex_unlock(&j1939_netdev_lock);
> +
> dev_put(ndev);
> kfree(priv);
>
> --
> 2.34.1
>
>


Thank you for your investigation. How about this change?
--- a/net/can/j1939/main.c
+++ b/net/can/j1939/main.c
@@ -285,8 +285,7 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev)
*/
kref_get(&priv_new->rx_kref);
spin_unlock(&j1939_netdev_lock);
- dev_put(ndev);
- kfree(priv);
+ j1939_priv_put(priv);
return priv_new;
}
j1939_priv_set(ndev, priv);
@@ -300,8 +299,7 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev)

out_priv_put:
j1939_priv_set(ndev, NULL);
- dev_put(ndev);
- kfree(priv);
+ j1939_priv_put(priv);

return ERR_PTR(ret);
}
If I see it correctly, the problem is kfree() which is called without respecting
the ref counting. If CPU1 has priv_new, refcounting is increased. The priv will
not be freed on this place.

Can you please test it?

Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
\
 
 \ /
  Last update: 2023-05-26 20:16    [W:0.084 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site