lkml.org 
[lkml]   [2023]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant
From


On 26.05.2023 17:31, Devi Priya wrote:
> Add the initial device tree support for the Reference Design Platform (RDP)
> 453 based on IPQ9574 family of SoCs. This patch adds support for Console
> UART, SPI NOR and SMPA1 regulator node.
>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>


BTW what's the naming scheme for IPQ?

IPQabcd

'a' - tier
'b' - 0/5 - network generation dependent?
'cd' - model

?

Konrad
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 80 +++++++++++++++++++++
> 2 files changed, 81 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 834e790bec90..56ec3d84ad43 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> new file mode 100644
> index 000000000000..f01de6628c3b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ9574 RDP453 board device tree source
> + *
> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq9574.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
> + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
> +
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&blsp1_spi0 {
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + flash@0 {
> + compatible = "micron,n25q128a11", "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&blsp1_uart2 {
> + pinctrl-0 = <&uart2_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + regulators {
> + compatible = "qcom,rpm-mp5496-regulators";
> +
> + ipq9574_s1: s1 {
> + /*
> + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> + * During regulator registration, kernel not knowing the initial voltage,
> + * considers it as zero and brings up the regulators with minimum supported voltage.
> + * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> + * the regulators are brought up with 725mV which is sufficient for all the
> + * corner parts to operate at 800MHz
> + */
> + regulator-min-microvolt = <725000>;
> + regulator-max-microvolt = <1075000>;
> + };
> + };
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&tlmm {
> + spi_0_pins: spi-0-state {
> + pins = "gpio11", "gpio12", "gpio13", "gpio14";
> + function = "blsp0_spi";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +};
> +
> +&xo_board_clk {
> + clock-frequency = <24000000>;
> +};

\
 
 \ /
  Last update: 2023-05-26 22:46    [W:0.121 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site