lkml.org 
[lkml]   [2023]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
Date
Convert Atmel SAMA5D2 shutdown controller to YAML.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
.../devicetree/bindings/arm/atmel-sysregs.txt | 63 ----------
.../power/reset/atmel,sama5d2-shdwc.yaml | 114 ++++++++++++++++++
2 files changed, 114 insertions(+), 63 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index e6b2fb291b45..67a66bf74895 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -52,69 +52,6 @@ Example:
reg = <0xe3804000 0x1000>;
};

-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
- "microchip,sama7g5-shdwc"
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
- microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
- by the child, forces the wake-up of the core power supply on a high level.
- The default is to be active low.
-
-Example:
-
-On the SoC side:
- shdwc@f8048010 {
- compatible = "atmel,sama5d2-shdwc";
- reg = <0xf8048010 0x10>;
- clocks = <&clk32k>;
- #address-cells = <1>;
- #size-cells = <0>;
- atmel,wakeup-rtc-timer;
- };
-
-On the board side:
- shdwc@f8048010 {
- debounce-delay-us = <976>;
-
- input@0 {
- reg = <0>;
- };
-
- input@1 {
- reg = <1>;
- atmel,wakeup-active-high;
- };
- };
-
Special Function Registers (SFR)

Special Function Registers (SFR) manage specific aspects of the integrated
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
new file mode 100644
index 000000000000..613668d6099b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D2 SHDWC Shutdown Controller
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+ Atmel SHDWC shutdown controller controls the power supplies VDDIO and VDDCORE
+ and the wake-up detection on debounced input lines.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: microchip,sama7g5-shdwc
+ - const: syscon
+ - items:
+ enum:
+ - atmel,sama5d2-shdwc
+ - microchip,sam9x60-shdwc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ debounce-delay-us:
+ description: |
+ Minimum wake-up inputs debouncer period in microseconds. It is usually a
+ board-related property.
+
+ atmel,wakeup-rtc-timer:
+ description: enable real-time clock wake-up
+ type: boolean
+
+patternProperties:
+ "^input@[0-15]$":
+ description: |
+ Wake-up input nodes. These are usually described in the "board" part of
+ the Device Tree. Note also that input 0 is linked to the wake-up pin and
+ is frequently used.
+ type: object
+ properties:
+ reg:
+ description: contains the wake-up input index
+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 ]
+
+ atmel,wakeup-active-high:
+ description: |
+ The corresponding wake-up input described by the child forces the
+ wake-up of the core power supply on a high level. The default is to
+ be active low.
+ type: boolean
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,sam9x60-shdwc
+ - microchip,sama7g5-shdwc
+ then:
+ properties:
+ atmel,wakeup-rtt-timer:
+ description: enable real-time timer wake-up
+ type: boolean
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ shdwc: poweroff@f8048010 {
+ compatible = "atmel,sama5d2-shdwc";
+ reg = <0xf8048010 0x10>;
+ clocks = <&clk32k>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ debounce-delay-us = <976>;
+
+ input@0 {
+ reg = <0>;
+ };
+
+ input@1 {
+ reg = <1>;
+ atmel,wakeup-active-high;
+ };
+ };
+
+...
--
2.34.1
\
 
 \ /
  Last update: 2023-05-23 08:17    [W:0.246 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site