lkml.org 
[lkml]   [2023]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/9] dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed panels
    Date
    As talked about in the patch ("drm/panel: Add a way for other devices
    to follow panel state"), touchscreens that are connected to panels are
    generally expected to be power sequenced together with the panel
    they're attached to. Today, nothing provides information allowing you
    to find out that a touchscreen is connected to a panel. Let's add a
    phandle for this.

    Signed-off-by: Douglas Anderson <dianders@chromium.org>
    ---

    Documentation/devicetree/bindings/input/elan,ekth6915.yaml | 6 ++++++
    Documentation/devicetree/bindings/input/goodix,gt7375p.yaml | 6 ++++++
    Documentation/devicetree/bindings/input/hid-over-i2c.yaml | 6 ++++++
    3 files changed, 18 insertions(+)

    diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
    index 05e6f2df604c..d55b03bd3ec4 100644
    --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
    +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
    @@ -24,6 +24,12 @@ properties:
    interrupts:
    maxItems: 1

    + panel:
    + description: If this is a touchscreen, the panel it's connected to. This
    + indicates that the panel and touchscreen are expected to be power
    + sequenced together.
    + $ref: /schemas/types.yaml#/definitions/phandle
    +
    reset-gpios:
    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.

    diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
    index ce18d7dadae2..a5cd8dafd450 100644
    --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
    +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
    @@ -30,6 +30,12 @@ properties:
    interrupts:
    maxItems: 1

    + panel:
    + description: If this is a touchscreen, the panel it's connected to. This
    + indicates that the panel and touchscreen are expected to be power
    + sequenced together.
    + $ref: /schemas/types.yaml#/definitions/phandle
    +
    reset-gpios:
    true

    diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
    index 7156b08f7645..c7ea6c148838 100644
    --- a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
    +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
    @@ -44,6 +44,12 @@ properties:
    description: HID descriptor address
    $ref: /schemas/types.yaml#/definitions/uint32

    + panel:
    + description: If this is a touchscreen, the panel it's connected to. This
    + indicates that the panel and touchscreen are expected to be power
    + sequenced together.
    + $ref: /schemas/types.yaml#/definitions/phandle
    +
    post-power-on-delay-ms:
    description: Time required by the device after enabling its regulators
    or powering it on, before it is ready for communication.
    --
    2.40.1.698.g37aff9b760-goog
    \
     
     \ /
      Last update: 2023-05-23 21:32    [W:4.049 / U:0.148 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site