lkml.org 
[lkml]   [2023]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
Hi Alan,

Thanks for taking the time out to share more details !
+1 on your comment: " A big problem with the USB gadget
framework is that it does not clearly state which routines have to run
in process context and which have to run in interrupt/atomic context."


I started to work on allow_connect and other suggestions that you had made.
In one of the previous comments you had mentioned that the
connect_lock should be a spinlock and not a mutex.
Right now there are four conditions that seem to be deciding whether
pullup needs to be enabled or disabled through gadget->ops->pullup().
1. Gadget not deactivated through usb_gadget_deactivate()
2. Gadget has to be started through usb_gadget_udc_start().
soft_connect_store() can start/stop gadget.
3. usb_gadget has been connected through usb_gadget_connect(). This is
assuming we are getting rid of usb_udc_vbus_handler.
4. allow_connect is true

I have so far identified two constraints here:
a. gadget->ops->pullup() can sleep in some implementations.
For instance:
BUG: scheduling while atomic: init/1/0x00000002
..
[ 26.990631][ T1] Call trace:
[ 26.993759][ T1] dump_backtrace+0x104/0x128
[ 26.998281][ T1] show_stack+0x20/0x30
[ 27.002279][ T1] dump_stack_lvl+0x6c/0x9c
[ 27.006627][ T1] __schedule_bug+0x84/0xb4
[ 27.010973][ T1] __schedule+0x6f0/0xaec
[ 27.015147][ T1] schedule+0xc8/0x134
[ 27.019059][ T1] schedule_timeout+0x98/0x134
[ 27.023666][ T1] msleep+0x34/0x4c
[ 27.027317][ T1] dwc3_core_soft_reset+0xf0/0x354
[ 27.032273][ T1] dwc3_gadget_pullup+0xec/0x1d8
[ 27.037055][ T1] usb_gadget_pullup_update_locked+0xa0/0x1e0
[ 27.042967][ T1] udc_bind_to_driver+0x1e4/0x30c
[ 27.047835][ T1] usb_gadget_probe_driver+0xd0/0x178
[ 27.053051][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c
[ 27.058442][ T1] configfs_write_iter+0x100/0x178
[ 27.063399][ T1] vfs_write+0x278/0x3c4
[ 27.067483][ T1] ksys_write+0x80/0xf4

b. gadget->ops->udc_start can also sleep in some implementations.
For example:
[ 28.024255][ T1] BUG: scheduling while atomic: init/1/0x00000002
....
[ 28.324996][ T1] Call trace:
[ 28.328126][ T1] dump_backtrace+0x104/0x128
[ 28.332647][ T1] show_stack+0x20/0x30
[ 28.336645][ T1] dump_stack_lvl+0x6c/0x9c
[ 28.340993][ T1] __schedule_bug+0x84/0xb4
[ 28.345340][ T1] __schedule+0x6f0/0xaec
[ 28.349513][ T1] schedule+0xc8/0x134
[ 28.353425][ T1] schedule_timeout+0x4c/0x134
[ 28.358033][ T1] wait_for_common+0xac/0x13c
[ 28.362554][ T1] wait_for_completion_killable+0x20/0x3c
[ 28.368118][ T1] __kthread_create_on_node+0xe4/0x1ec
[ 28.373422][ T1] kthread_create_on_node+0x54/0x80
[ 28.378464][ T1] setup_irq_thread+0x50/0x108
[ 28.383072][ T1] __setup_irq+0x90/0x87c
[ 28.387245][ T1] request_threaded_irq+0x144/0x180
[ 28.392287][ T1] dwc3_gadget_start+0x50/0xac
[ 28.396866][ T1] udc_bind_to_driver+0x14c/0x31c
[ 28.401763][ T1] usb_gadget_probe_driver+0xd0/0x178
[ 28.406980][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c
[ 28.412370][ T1] configfs_write_iter+0x100/0x178
[ 28.417325][ T1] vfs_write+0x278/0x3c4
[ 28.421411][ T1] ksys_write+0x80/0xf4

static int dwc3_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
struct dwc3 *dwc = gadget_to_dwc(g);
...
irq = dwc->irq_gadget;
ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
IRQF_SHARED, "dwc3", dwc->ev_buf);

Given that "1016fc0c096c USB: gadget: Fix obscure lockdep violation
for udc_mutex" has been there for a while and no one has reported
issues so far, perhaps ->disconnect() callback is no longer being
invoked in atomic context and the documentation is what that needs to
be updated ?

Thanks,
Badhri

On Fri, May 19, 2023 at 10:27 AM Alan Stern <stern@rowland.harvard.edu> wrote:
>
> On Fri, May 19, 2023 at 08:44:57AM -0700, Badhri Jagan Sridharan wrote:
> > On Fri, May 19, 2023 at 8:07 AM Alan Stern <stern@rowland.harvard.edu> wrote:
> > >
> > > On Fri, May 19, 2023 at 10:49:49AM -0400, Alan Stern wrote:
> > > > On Fri, May 19, 2023 at 04:30:41AM +0000, Badhri Jagan Sridharan wrote:
> > > > > chipidea udc calls usb_udc_vbus_handler from udc_start gadget
> > > > > ops causing a deadlock. Avoid this by offloading usb_udc_vbus_handler
> > > > > processing.
> > > >
> > > > Look, this is way overkill.
> > > >
> > > > usb_udc_vbus_handler() has only two jobs to do: set udc->vbus and call
> > > > usb_udc_connect_control(). Furthermore, it gets called from only two
> > > > drivers: chipidea and max3420.
> > > >
> > > > Why not have the callers set udc->vbus themselves and then call
> > > > usb_gadget_{dis}connect() directly? Then we could eliminate
> > > > usb_udc_vbus_handler() entirely. And the unnecessary calls -- the ones
> > > > causing deadlocks -- from within udc_start() and udc_stop() handlers can
> > > > be removed with no further consequence.
> > > >
> > > > This approach simplifies and removes code. Whereas your approach
> > > > complicates and adds code for no good reason.
> > >
> > > I changed my mind.
> > >
> > > After looking more closely, I found the comment in gadget.h about
> > > ->disconnect() callbacks happening in interrupt context. This means we
> > > cannot use a mutex to protect the associated state, and therefore the
> > > connect_lock _must_ be a spinlock, not a mutex.
> >
> > Quick observation so that I don't misunderstand.
> > I already see gadget->udc->driver->disconnect(gadget) being called with
> > udc_lock being held.
> >
> > mutex_lock(&udc_lock);
> > if (gadget->udc->driver)
> > gadget->udc->driver->disconnect(gadget);
> > mutex_unlock(&udc_lock);
> >
> > The below patch seems to have introduced it:
> > 1016fc0c096c USB: gadget: Fix obscure lockdep violation for udc_mutex
>
> Hmmm... You're right about this. A big problem with the USB gadget
> framework is that it does not clearly state which routines have to run
> in process context and which have to run in interrupt/atomic context.
> People therefore don't think about it and frequently get it wrong.
>
> So now the problem is that the UDC or transceiver driver may detect
> (typically in an interrupt handler) that VBUS power has appeared or
> disappeared, and it wants to tell the core to adjust the D+/D- pullup
> signals appropriately. The core notifies the UDC driver about this, and
> then in the case of a disconnection, it has to notify the gadget driver.
> But notifying the gadget driver requires process context for the
> udc_lock mutex, the ultimate reason being that disconnect notifications
> can race with gadget driver binding and unbinding.
>
> If we could prevent those races in some other way then we wouldn't need
> to hold udc_lock in usb_gadget_disconnect(). This seems like a sensible
> thing to do in any case; the UDC core should never allow a connection to
> occur before a gadget driver is bound or after it is unbound.
>
> The first approach that occurs to me is to add a boolean allow_connect
> flag to struct usb_udc, together with a global spinlock to synchronize
> access to it. Then usb_gadget_disconnect() could check the flag before
> calling driver->disconnect(), gadget_bind_driver() could set the flag
> before calling usb_udc_connect_control(), and gadget_unbind_driver()
> could clear the flag before calling usb_gadget_disconnect().
>
> (Another possible approach would be to change gadget->deactivated into a
> counter. It would still need to be synchronized by a spinlock,
> however.)
>
> This will simplify matters considerably. udc_lock can remain a mutex
> and the deadlock problem should go away.
>
> Do you want to try adding allow_connect as described here or would you
> prefer that I do it?
>
> (And in any case, we should prevent the udc_start and udc_stop callbacks
> in the chipidea and max3420 drivers from trying to update the connection
> status.)
>
> Alan Stern

\
 
 \ /
  Last update: 2023-05-22 09:52    [W:0.081 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site