lkml.org 
[lkml]   [2023]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v13 01/10] drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register
Date
The DSC CTL_FLUSH register should be programmed with the 22th bit
(DSC_IDX) to flush the DSC hardware blocks, not the literal value of
22 (which corresponds to flushing VIG1, VIG2 and RGB1 instead).

Changes in V12:
-- split this patch out of "separate DSC flush update out of interface"

Changes in V13:
-- rewording the commit text

Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 4f7cfa9..69d0ea2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -525,7 +525,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
BIT(cfg->merge_3d - MERGE_3D_0));
if (cfg->dsc) {
- DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
+ DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, BIT(DSC_IDX));
DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
}
}
--
2.7.4
\
 
 \ /
  Last update: 2023-05-23 02:41    [W:0.131 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site