lkml.org 
[lkml]   [2023]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] AT91 PIO4 push-pull enable
Date
From: Ryan Wanner <Ryan.Wanner@microchip.com>

This patch set enables push-pull pin configuation for PIO4 IP as well as
updating the DT binding.

Removing the integer argument for open-drain allows the driver to
process drive configuration from gpiolib as the integer argument is
discarded.

Ryan Wanner (3):
pinctrl: at91-pio4: Enable Push-Pull configuration
dt-bindings: pinctrl: at91-pio4: Add push-pull support
ARM: dts: at91: Return to boolean properties

.../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 3 ++-
arch/arm/boot/dts/at91-kizbox3-hs.dts | 2 +-
arch/arm/boot/dts/at91-kizbox3_common.dtsi | 2 +-
drivers/pinctrl/pinctrl-at91-pio4.c | 15 +++++++++++----
4 files changed, 15 insertions(+), 7 deletions(-)

--
2.39.2

\
 
 \ /
  Last update: 2023-05-17 13:54    [from the cache]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog