Messages in this thread |  | | Date | Thu, 18 May 2023 03:19:49 +0300 | | Subject | Re: [PATCH 2/2] drm/panel: Add driver for Visionox r66451 panel | | From | Dmitry Baryshkov <> |
| |
On 16/05/2023 23:20, Jessica Zhang wrote: > Add support for the 1080x2340 Visionox R66451 AMOLED DSI panel that > comes with the Qualcomm HDK8350 display expansion pack. > > The panel enables display compression (DSC v1.2) by default. > > Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> > --- > drivers/gpu/drm/panel/Kconfig | 8 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-visionox-r66451.c | 395 ++++++++++++++++++++++++++ > 3 files changed, 404 insertions(+) > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 29cf5fa39ff2..9c2c36dbddf3 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -766,6 +766,14 @@ config DRM_PANEL_VISIONOX_VTDR6130 > Say Y here if you want to enable support for Visionox > VTDR6130 1080x2400 AMOLED DSI panel. > > +config DRM_PANEL_VISIONOX_R66451 > + tristate "Visionox R66451" > + depends on OF > + depends on DRM_MIPI_DSI > + help > + Say Y here if you want to enable support for Visionox > + R66451 1080x2340 AMOLED DSI panel. > + > config DRM_PANEL_WIDECHIPS_WS2401 > tristate "Widechips WS2401 DPI panel driver" > depends on SPI && GPIOLIB > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index b3e8ba29edd3..e043a92ee676 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -78,5 +78,6 @@ obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o > obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o > obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o > obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o > +obj-$(CONFIG_DRM_PANEL_VISIONOX_R66451) += panel-visionox-r66451.o > obj-$(CONFIG_DRM_PANEL_WIDECHIPS_WS2401) += panel-widechips-ws2401.o > obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o > diff --git a/drivers/gpu/drm/panel/panel-visionox-r66451.c b/drivers/gpu/drm/panel/panel-visionox-r66451.c > new file mode 100644 > index 000000000000..e3648ead3e84 > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-visionox-r66451.c > @@ -0,0 +1,395 @@ > +//SPDX-License-Identifier: GPL-2.0-only > +//Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > +#include <drm/display/drm_dsc.h> > +#include <drm/display/drm_dsc_helper.h> > + > +#include <video/mipi_display.h> > + > +struct visionox_r66451 { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi; > + struct gpio_desc *reset_gpio; > + struct regulator_bulk_data supplies[2]; > + bool prepared, enabled; > +}; > + > +static inline struct visionox_r66451 *to_visionox_r66451(struct drm_panel *panel) > +{ > + return container_of(panel, struct visionox_r66451, panel); > +} > + > +static void visionox_r66451_reset(struct visionox_r66451 *ctx) > +{ > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(10000, 10100); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + usleep_range(10000, 10100); > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(10000, 10100); > +} > + > +static int visionox_r66451_on(struct visionox_r66451 *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xc2, > + 0x09, 0x24, 0x0c, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, > + 0x09, 0x3c); > + mipi_dsi_dcs_write_seq(dsi, 0xd7, > + 0x00, 0xb9, 0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a, > + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, > + 0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a); > + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80); > + mipi_dsi_dcs_write_seq(dsi, 0xde, > + 0x40, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, > + 0x10, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x02, 0x00, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04); > + mipi_dsi_dcs_write_seq(dsi, 0xe8, 0x00, 0x02); > + mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x00, 0x08); > + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xc4, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x32); > + mipi_dsi_dcs_write_seq(dsi, 0xcf, > + 0x64, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, > + 0x00, 0x0b, 0x77, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, > + 0x02, 0x02, 0x02, 0x02, 0x02, 0x03); > + mipi_dsi_dcs_write_seq(dsi, 0xd3, > + 0x45, 0x00, 0x00, 0x01, 0x13, 0x15, 0x00, 0x15, 0x07, > + 0x0f, 0x77, 0x77, 0x77, 0x37, 0xb2, 0x11, 0x00, 0xa0, > + 0x3c, 0x9c); > + mipi_dsi_dcs_write_seq(dsi, 0xd7, > + 0x00, 0xb9, 0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a, > + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, > + 0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a); > + mipi_dsi_dcs_write_seq(dsi, 0xd8, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a, > + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x0a, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, > + 0x00, 0x32, 0x00, 0x0a, 0x00, 0x22); > + mipi_dsi_dcs_write_seq(dsi, 0xdf, > + 0x50, 0x42, 0x58, 0x81, 0x2d, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x01, 0x0f, 0xff, 0xd4, 0x0e, 0x00, 0x00, > + 0x00, 0x00, 0x00, 0x00, 0x0f, 0x53, 0xf1, 0x00, 0x00, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x01); > + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80); > + mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x34, 0xb4, 0x00, 0x00, 0x00, 0x39, 0x04, 0x09, 0x34); > + mipi_dsi_dcs_write_seq(dsi, 0xe6, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04); > + mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x40); > + mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x50, 0x00, 0x00, 0x00, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x11); > + mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x01, 0x00, 0x00, 0x00, 0x01); > + mipi_dsi_dcs_write_seq(dsi, 0xf4, 0x00, 0x02); > + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x19); > + mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x42); > + mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x04, 0x37);
Please use mipi_dsi_dcs_set_column_address(dsi, 0, 1080 - 1);
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, 0x00, 0x09, 0x23);
mipi_dsi_dcs_set_page_address(dsi, 0, 2340 - 1);
> + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); > + return ret; > + } > + msleep(120); > + > + ret = mipi_dsi_dcs_set_display_on(dsi);
Should the mipi_dsi_dcs_set_display_on() (and maybe exit sleep mode) be a a part of _enable()? Correspondingly _off should IMO be a part of _disable callback().
> + if (ret < 0) { > + dev_err(dev, "Failed on set display on: %d\n", ret); > + return ret; > + } > + msleep(20);
Do we need to add here the following line?
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> + > + return 0; > +} > + > +static int visionox_r66451_off(struct visionox_r66451 *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display off: %d\n", ret); > + return ret; > + } > + msleep(20); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); > + return ret; > + } > + msleep(120); > + > + return 0; > +} > + > +static int visionox_r66451_prepare(struct drm_panel *panel) > +{ > + struct visionox_r66451 *ctx = to_visionox_r66451(panel); > + struct device *dev = &ctx->dsi->dev; > + int ret; > + > + if (ctx->prepared) > + return 0; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + if (ret < 0) > + return ret; > + > + visionox_r66451_reset(ctx); > + > + ret = visionox_r66451_on(ctx); > + if (ret < 0) { > + dev_err(dev, "Failed to initialize panel: %d\n", ret); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + return ret; > + } > + > + ctx->prepared = true; > + return 0; > +} > + > +static int visionox_r66451_unprepare(struct drm_panel *panel) > +{ > + struct visionox_r66451 *ctx = to_visionox_r66451(panel); > + struct device *dev = &ctx->dsi->dev; > + int ret; > + > + if (!ctx->prepared) > + return 0; > + > + ret = visionox_r66451_off(ctx); > + if (ret < 0) > + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); > + > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + > + ctx->prepared = false; > + return 0; > +} > + > +static const struct drm_display_mode visionox_r66451_mode = { > + .clock = (1080 + 95 + 1 + 40) * (2340 + 25 + 1 + 4) * 120 / 1000, > + .hdisplay = 1080, > + .hsync_start = 1080 + 95, > + .hsync_end = 1080 + 95 + 1, > + .htotal = 1080 + 95 + 1 + 40, > + .vdisplay = 2340, > + .vsync_start = 2340 + 25, > + .vsync_end = 2340 + 25 + 1, > + .vtotal = 2340 + 25 + 1 + 4, > + .width_mm = 0, > + .height_mm = 0,
Please provide real values here.
> +}; > + > +static int visionox_r66451_enable(struct drm_panel *panel) > +{ > + struct visionox_r66451 *ctx = to_visionox_r66451(panel); > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct drm_dsc_picture_parameter_set pps; > + int ret; > + > + if (ctx->enabled) > + return 0; > + > + if (!dsi->dsc) { > + dev_err(&dsi->dev, "DSC not attached to DSI\n"); > + return -ENODEV; > + } > + > + drm_dsc_pps_payload_pack(&pps, dsi->dsc); > + ret = mipi_dsi_picture_parameter_set(dsi, &pps); > + > + ctx->enabled = true; > + > + return 0; > +} > + > +static int visionox_r66451_disable(struct drm_panel *panel) > +{ > + struct visionox_r66451 *ctx = to_visionox_r66451(panel); > + > + ctx->enabled = false; > + > + return 0; > +} > + > +static int visionox_r66451_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(connector->dev, &visionox_r66451_mode); > + if (!mode) > + return -ENOMEM; > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + connector->display_info.width_mm = mode->width_mm; > + connector->display_info.height_mm = mode->height_mm; > + drm_mode_probed_add(connector, mode);
Can we use drm_connector_helper_get_modes_fixed() instead?
> + > + return 1; > +} > + > +static const struct drm_panel_funcs visionox_r66451_funcs = { > + .prepare = visionox_r66451_prepare, > + .unprepare = visionox_r66451_unprepare, > + .get_modes = visionox_r66451_get_modes, > + .enable = visionox_r66451_enable, > + .disable = visionox_r66451_disable, > +}; > + > +static int visionox_r66451_bl_update_status(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness = backlight_get_brightness(bl); > + > + return mipi_dsi_dcs_set_display_brightness(dsi, cpu_to_le16(brightness));
mipi_dsi_dcs_set_display_brightness() already converts the brightness, so you don't need cpu_to_le16 here.
> +} > + > +static const struct backlight_ops visionox_r66451_bl_ops = { > + .update_status = visionox_r66451_bl_update_status, > +}; > + > +static struct backlight_device * > +visionox_r66451_create_backlight(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + const struct backlight_properties props = { > + .type = BACKLIGHT_RAW, > + .brightness = 255, > + .max_brightness = 4095, > + }; > + > + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, > + &visionox_r66451_bl_ops, &props); > +} > + > +static int visionox_r66451_probe(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + struct visionox_r66451 *ctx; > + struct drm_dsc_config *dsc; > + int ret = 0; > + > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL); > + if (!dsc) > + return -ENOMEM; > + > + /* Set DSC params */ > + dsc->dsc_version_major = 0x1; > + dsc->dsc_version_minor = 0x2; > + > + dsc->slice_height = 20; > + dsc->slice_width = 540; > + dsc->slice_count = 2; > + dsc->bits_per_component = 8; > + dsc->bits_per_pixel = 0x8 << 4; > + dsc->block_pred_enable = true; > + > + dsi->dsc = dsc; > + > + ctx->supplies[0].supply = "vddio"; > + ctx->supplies[1].supply = "vdd"; > + > + ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + > + if (ret < 0) > + return ret; > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset-gpios\n"); > + > + ctx->dsi = dsi; > + mipi_dsi_set_drvdata(dsi, ctx); > + > + dsi->lanes = 4; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS; > + > + drm_panel_init(&ctx->panel, dev, &visionox_r66451_funcs, DRM_MODE_CONNECTOR_DSI); > + ctx->panel.backlight = visionox_r66451_create_backlight(dsi); > + if (IS_ERR(ctx->panel.backlight)) > + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), > + "Failed to create backlight\n"); > + > + drm_panel_add(&ctx->panel); > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); > + drm_panel_remove(&ctx->panel); > + } > + > + return ret; > +} > + > +static void visionox_r66451_remove(struct mipi_dsi_device *dsi) > +{ > + struct visionox_r66451 *ctx = mipi_dsi_get_drvdata(dsi); > + int ret; > + > + ret = mipi_dsi_detach(dsi); > + if (ret < 0) > + dev_err(&dsi->dev, "Failed to detach DSI host: %d\n", ret); > + > + drm_panel_remove(&ctx->panel); > +} > + > +static const struct of_device_id visionox_r66451_of_match[] = { > + {.compatible = "visionox,r66451"}, > + { /*sentinel*/ } > +}; > +MODULE_DEVICE_TABLE(of, visionox_r66451_of_match); > + > +static struct mipi_dsi_driver visionox_r66451_driver = { > + .probe = visionox_r66451_probe, > + .remove = visionox_r66451_remove, > + .driver = { > + .name = "panel-visionox-r66451", > + .of_match_table = visionox_r66451_of_match, > + }, > +}; > + > +module_mipi_dsi_driver(visionox_r66451_driver); > + > +MODULE_AUTHOR("Jessica Zhang <quic_jesszhan@quicinc.com>"); > +MODULE_DESCRIPTION("Panel driver for the Visionox R66451 AMOLED DSI panel"); > +MODULE_LICENSE("GPL"); >
-- With best wishes Dmitry
|  |