lkml.org 
[lkml]   [2023]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers
From


On 5/16/2023 5:47 PM, Johan Hovold wrote:
> On Sun, May 14, 2023 at 11:19:12AM +0530, Krishna Kurapati wrote:
>> On some SoC's like SA8295P where the tertiary controller is host-only
>> capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
>> Trying to setup them up during core_init leads to a crash.
>>
>> For DRD/Peripheral supported controllers, event buffer setup is done
>> again in gadget_pullup. Skip setup or cleanup of event buffers if
>> controller is host-only capable.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>> drivers/usb/dwc3/core.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index e983aef1fb93..46192d08d1b6 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -505,6 +505,11 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
>> int dwc3_event_buffers_setup(struct dwc3 *dwc)
>> {
>> struct dwc3_event_buffer *evt;
>> + unsigned int hw_mode;
>> +
>> + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>> + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST)
>> + return 0;
>>
>> evt = dwc->ev_buf;
>
> How about adding this check to dwc3_alloc_event_buffers() instead as
> there should be no need to allocate buffer that you never use?
>
> Then you can just check dwc->ev_buf here and elsewhere.
>

Thanks for this idea. We can save 4096 bytes from being allocated this
way. Will get this in next version.

Regards,
Krishna,

\
 
 \ /
  Last update: 2023-05-16 16:29    [W:0.220 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site