lkml.org 
[lkml]   [2023]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] wifi: mt76: mt7915: add support for MT7981
Hi Simon,

thank you for reviewing!

On Sun, May 14, 2023 at 04:53:43PM +0200, Simon Horman wrote:
> On Sat, May 13, 2023 at 03:35:51PM +0200, Daniel Golle wrote:
> > From: Alexander Couzens <lynxis@fe80.eu>
> >
> > Add support for the MediaTek MT7981 SoC which is similar to the MT7986
> > but with a newer IP cores and only 2x ARM Cortex-A53 instead of 4x.
> > Unlike MT7986 the MT7981 can only connect a single wireless frontend,
> > usually MT7976 is used for DBDC.
> >
> > Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org>
>
> ...
>
> > @@ -489,7 +516,10 @@ static int mt7986_wmac_adie_patch_7976(struct mt7915_dev *dev, u8 adie)
> > rg_xo_01 = 0x1d59080f;
> > rg_xo_03 = 0x34c00fe0;
> > } else {
> > - rg_xo_01 = 0x1959f80f;
> > + if (is_mt7981(&dev->mt76))
> > + rg_xo_01 = 0x1959c80f;
> > + else if (is_mt7986(&dev->mt76))
> > + rg_xo_01 = 0x1959f80f;
>
> Hi Daniel,
>
> rg_xo_01 will be used uninitialised below if we get here
> and neither of the conditions above are true.
>
> Can this occur?

No, it cannot occur. Either of is_mt7981() or is_mt7986() will return
true, as the driver is bound via one of the two compatibles
'mediatek,mt7986-wmac' or newly added 'mediatek,mt7981-wmac'.
Based on that the match_data is either 0x7986 or 0x7981, which is then
used as chip_id, which is used by the is_mt7981() and is_mt7986()
functions.

>
> > rg_xo_03 = 0x34d00fe0;
> > }
> >
>
> ...
>

\
 
 \ /
  Last update: 2023-05-14 18:35    [W:0.048 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site