lkml.org 
[lkml]   [2023]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe()
Date
Should an error occur after calling sun8i_ths_resource_init() in the probe
function, some resources need to be released, as already done in the
.remove() function.

Switch to the devm_clk_get_enabled() helper and add a new devm_action to
turn sun8i_ths_resource_init() into a fully managed function.

This fixes the issue and removes some LoC at the same time.

Fixes: dccc5c3b6f30 ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
This changes the order of the release functions, but should be fine.
---
drivers/thermal/sun8i_thermal.c | 43 +++++++++------------------------
1 file changed, 12 insertions(+), 31 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 793ddce72132..8f4c29bc85aa 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -319,6 +319,11 @@ static int sun8i_ths_calibrate(struct ths_device *tmdev)
return ret;
}

+static void sun8i_ths_reset_control_assert(void *data)
+{
+ reset_control_assert(data);
+}
+
static int sun8i_ths_resource_init(struct ths_device *tmdev)
{
struct device *dev = tmdev->dev;
@@ -339,13 +344,13 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
if (IS_ERR(tmdev->reset))
return PTR_ERR(tmdev->reset);

- tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ tmdev->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus");
if (IS_ERR(tmdev->bus_clk))
return PTR_ERR(tmdev->bus_clk);
}

if (tmdev->chip->has_mod_clk) {
- tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
+ tmdev->mod_clk = devm_clk_get_enabled(&pdev->dev, "mod");
if (IS_ERR(tmdev->mod_clk))
return PTR_ERR(tmdev->mod_clk);
}
@@ -354,32 +359,20 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
if (ret)
return ret;

- ret = clk_prepare_enable(tmdev->bus_clk);
+ ret = devm_add_action_or_reset(dev, sun8i_ths_reset_control_assert,
+ tmdev->reset);
if (ret)
- goto assert_reset;
+ return ret;

ret = clk_set_rate(tmdev->mod_clk, 24000000);
if (ret)
- goto bus_disable;
-
- ret = clk_prepare_enable(tmdev->mod_clk);
- if (ret)
- goto bus_disable;
+ return ret;

ret = sun8i_ths_calibrate(tmdev);
if (ret)
- goto mod_disable;
+ return ret;

return 0;
-
-mod_disable:
- clk_disable_unprepare(tmdev->mod_clk);
-bus_disable:
- clk_disable_unprepare(tmdev->bus_clk);
-assert_reset:
- reset_control_assert(tmdev->reset);
-
- return ret;
}

static int sun8i_h3_thermal_init(struct ths_device *tmdev)
@@ -530,17 +523,6 @@ static int sun8i_ths_probe(struct platform_device *pdev)
return 0;
}

-static int sun8i_ths_remove(struct platform_device *pdev)
-{
- struct ths_device *tmdev = platform_get_drvdata(pdev);
-
- clk_disable_unprepare(tmdev->mod_clk);
- clk_disable_unprepare(tmdev->bus_clk);
- reset_control_assert(tmdev->reset);
-
- return 0;
-}
-
static const struct ths_thermal_chip sun8i_a83t_ths = {
.sensor_num = 3,
.scale = 705,
@@ -642,7 +624,6 @@ MODULE_DEVICE_TABLE(of, of_ths_match);

static struct platform_driver ths_driver = {
.probe = sun8i_ths_probe,
- .remove = sun8i_ths_remove,
.driver = {
.name = "sun8i-thermal",
.of_match_table = of_ths_match,
--
2.34.1
\
 
 \ /
  Last update: 2023-05-14 17:23    [W:0.073 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site