Messages in this thread | | | Subject | Re: [PATCH net-next v3 0/3] Support for Wake-on-LAN for Broadcom PHYs | From | patchwork-bot+netdevbpf@kernel ... | Date | Sat, 13 May 2023 16:10:19 +0000 |
| |
Hello:
This series was applied to netdev/net-next.git (main) by David S. Miller <davem@davemloft.net>:
On Thu, 11 May 2023 10:21:07 -0700 you wrote: > This patch series adds support for Wake-on-LAN to the Broadcom PHY > driver. Specifically the BCM54210E/B50212E are capable of supporting > Wake-on-LAN using an external pin typically wired up to a system's GPIO. > > These PHY operate a programmable Ethernet MAC destination address > comparator which will fire up an interrupt whenever a match is received. > Because of that, it was necessary to introduce patch #1 which allows the > PHY driver's ->suspend() routine to be called unconditionally. This is > necessary in our case because we need a hook point into the device > suspend/resume flow to enable the wake-up interrupt as late as possible. > > [...]
Here is the summary with links: - [net-next,v3,1/3] net: phy: Allow drivers to always call into ->suspend() https://git.kernel.org/netdev/net-next/c/a7e3448086d5 - [net-next,v3,2/3] net: phy: broadcom: Add support for Wake-on-LAN https://git.kernel.org/netdev/net-next/c/8baddaa9d4ba - [net-next,v3,3/3] net: bcmgenet: Add support for PHY-based Wake-on-LAN https://git.kernel.org/netdev/net-next/c/7e400ff35cbe
You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
| |