lkml.org 
[lkml]   [2023]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/5] spi: sun6i: change OF match data to a struct
Date
From: Icenowy Zheng <icenowy@aosc.io>

As we're adding more properties to the OF match data, convert it to a
struct now.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/spi/spi-sun6i.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 7532c85a352c..01a01cd86db5 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -85,6 +85,10 @@
#define SUN6I_TXDATA_REG 0x200
#define SUN6I_RXDATA_REG 0x300

+struct sun6i_spi_cfg {
+ unsigned long fifo_depth;
+};
+
struct sun6i_spi {
struct spi_master *master;
void __iomem *base_addr;
@@ -99,7 +103,7 @@ struct sun6i_spi {
const u8 *tx_buf;
u8 *rx_buf;
int len;
- unsigned long fifo_depth;
+ const struct sun6i_spi_cfg *cfg;
};

static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
@@ -156,7 +160,7 @@ static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi)
u8 byte;

/* See how much data we can fit */
- cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
+ cnt = sspi->cfg->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);

len = min((int)cnt, sspi->len);

@@ -289,14 +293,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
* the hardcoded value used in old generation of Allwinner
* SPI controller. (See spi-sun4i.c)
*/
- trig_level = sspi->fifo_depth / 4 * 3;
+ trig_level = sspi->cfg->fifo_depth / 4 * 3;
} else {
/*
* Setup FIFO DMA request trigger level
* We choose 1/2 of the full fifo depth, that value will
* be used as DMA burst length.
*/
- trig_level = sspi->fifo_depth / 2;
+ trig_level = sspi->cfg->fifo_depth / 2;

if (tfr->tx_buf)
reg |= SUN6I_FIFO_CTL_TF_DRQ_EN;
@@ -410,9 +414,9 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
reg = SUN6I_INT_CTL_TC;

if (!use_dma) {
- if (rx_len > sspi->fifo_depth)
+ if (rx_len > sspi->cfg->fifo_depth)
reg |= SUN6I_INT_CTL_RF_RDY;
- if (tx_len > sspi->fifo_depth)
+ if (tx_len > sspi->cfg->fifo_depth)
reg |= SUN6I_INT_CTL_TF_ERQ;
}

@@ -543,7 +547,7 @@ static bool sun6i_spi_can_dma(struct spi_master *master,
* the fifo length we can just fill the fifo and wait for a single
* irq, so don't bother setting up dma
*/
- return xfer->len > sspi->fifo_depth;
+ return xfer->len > sspi->cfg->fifo_depth;
}

static int sun6i_spi_probe(struct platform_device *pdev)
@@ -582,7 +586,7 @@ static int sun6i_spi_probe(struct platform_device *pdev)
}

sspi->master = master;
- sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
+ sspi->cfg = of_device_get_match_data(&pdev->dev);

master->max_speed_hz = 100 * 1000 * 1000;
master->min_speed_hz = 3 * 1000;
@@ -695,9 +699,17 @@ static void sun6i_spi_remove(struct platform_device *pdev)
dma_release_channel(master->dma_rx);
}

+static const struct sun6i_spi_cfg sun6i_a31_spi_cfg = {
+ .fifo_depth = SUN6I_FIFO_DEPTH,
+};
+
+static const struct sun6i_spi_cfg sun8i_h3_spi_cfg = {
+ .fifo_depth = SUN8I_FIFO_DEPTH,
+};
+
static const struct of_device_id sun6i_spi_match[] = {
- { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
- { .compatible = "allwinner,sun8i-h3-spi", .data = (void *)SUN8I_FIFO_DEPTH },
+ { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_cfg },
+ { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_cfg },
{}
};
MODULE_DEVICE_TABLE(of, sun6i_spi_match);
--
2.39.2
\
 
 \ /
  Last update: 2023-05-10 10:13    [W:0.199 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site