lkml.org 
[lkml]   [2023]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: marvell: align thermal node names with bindings
Date
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:

> Bindings expect thermal node names to end with '-thermal':
>
> armada-8040-db.dtb: thermal-zones: 'ap-thermal-cpu0', ... do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'

Applied on mvebu/dt64

Thanks,

Gregory


>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 10 +++++-----
> arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 2 +-
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> index 4e6d29ad32eb..2c920e22cec2 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> @@ -317,7 +317,7 @@ ap_thermal: thermal-sensor@80 {
> * first one that will have a critical trip point will be chosen.
> */
> thermal-zones {
> - ap_thermal_ic: ap-thermal-ic {
> + ap_thermal_ic: ap-ic-thermal {
> polling-delay-passive = <0>; /* Interrupt driven */
> polling-delay = <0>; /* Interrupt driven */
>
> @@ -334,7 +334,7 @@ ap_crit: ap-crit {
> cooling-maps { };
> };
>
> - ap_thermal_cpu0: ap-thermal-cpu0 {
> + ap_thermal_cpu0: ap-cpu0-thermal {
> polling-delay-passive = <1000>;
> polling-delay = <1000>;
>
> @@ -367,7 +367,7 @@ map0_emerg: map0-ermerg {
> };
> };
>
> - ap_thermal_cpu1: ap-thermal-cpu1 {
> + ap_thermal_cpu1: ap-cpu1-thermal {
> polling-delay-passive = <1000>;
> polling-delay = <1000>;
>
> @@ -400,7 +400,7 @@ map1_emerg: map1-emerg {
> };
> };
>
> - ap_thermal_cpu2: ap-thermal-cpu2 {
> + ap_thermal_cpu2: ap-cpu2-thermal {
> polling-delay-passive = <1000>;
> polling-delay = <1000>;
>
> @@ -433,7 +433,7 @@ map2_emerg: map2-emerg {
> };
> };
>
> - ap_thermal_cpu3: ap-thermal-cpu3 {
> + ap_thermal_cpu3: ap-cpu3-thermal {
> polling-delay-passive = <1000>;
> polling-delay = <1000>;
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 7d0043824f2a..0cc9ee9871e7 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> @@ -25,7 +25,7 @@ / {
> * The cooling maps are empty as there are no cooling devices.
> */
> thermal-zones {
> - CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
> + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
> polling-delay-passive = <0>; /* Interrupt driven */
> polling-delay = <0>; /* Interrupt driven */
>
> --
> 2.34.1
>

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2023-04-07 17:10    [W:0.084 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site