lkml.org 
[lkml]   [2023]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 4/5] spi: dw: Add DMA address widths capability check
On Fri, Apr 14, 2023 at 12:05:19PM +0000, Joy Chakraborty wrote:
> Store address width capabilities of DMA controller during init and check
> the same per transfer to make sure the bits/word requirement can be met.
>
> Current DW DMA driver requires both tx and rx channel to be configured
> and functional hence a subset of both tx and rx channel address width
> capability is checked with the width requirement(n_bytes) for a
> transfer.

...

> + /*
> + * Assuming both channels belong to the same DMA controller hence the
> + * address width capabilities most likely would be the same.

I would add something to explain the side of these address width, like

* Assuming both channels belong to the same DMA controller hence
* the peripheral side address width capabilities most likely would
* be the same.

> + */

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2023-04-18 09:36    [W:0.060 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site