lkml.org 
[lkml]   [2023]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V3 8/9] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
From


On 4/14/2023 5:01 PM, Konrad Dybcio wrote:
>
>
> On 14.04.2023 12:29, Sricharan Ramabadhran wrote:
>> Add initial device tree support for the Qualcomm IPQ5018 SoC and
>> rdp432-c2 board.
>>
>> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
>> Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
>> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>> [v3] Fixed all review comments and DTS schema warnings
> This is too vague.
>
Ha ok, infact below is the list of changes from V2 -> V3


*) Sorted the nodes based on address.
*) Removed the pcie fixed clocks.
*) Changed the board file name.
*) Added SDHCI nodes/pins.
*) Fixed the DT schema warnings.
*) Fixed rest of comments.

> [...]
>
>> +
>> + v2m1: v2m@1000 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00001000 0xffd>;
> Doesn't this exceed the ranges=<> of &intc?
>
Right, thanks for the catch. Will fix it.

Regards,
Sricharan

\
 
 \ /
  Last update: 2023-04-17 08:03    [W:0.054 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site