lkml.org 
[lkml]   [2023]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] ARM: dts: stm32: add USB OTG UTMI clock on stm32mp151
Date
It's needed on STM32MP15, when using the integrated full-speed PHY. This
clock is an output of USBPHYC, and the HS USBPHYC is not attached as PHY
in this case (managed directly by dwc2 ggpio glue):

&usbotg_hs {
compatible = "st,stm32mp15-fsotg", "snps,dwc2";
pinctrl-names = "default";
pinctrl-0 = <&usbotg_hs_pins_a &usbotg_fs_dp_dm_pins_a>;
vbus-supply = <&vbus_otg>;
status = "okay";
};

USBPHYC clock output must be used, so it can be properly enabled as a
clock provider.

Without this, currently, when the dualport High-Speed USBPHYC isn't
requested by either USBH or OTG, it remains uninitialized when probing
OTG: OTG configured with full-speed PHY isn't properly clocked, resulting
in error log like:
[ 2.383138] dwc2 49000000.usb-otg: dwc2_core_reset: HANG! Soft Reset
timeout GRSTCTL_CSFTRST.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
Changes in v2:
- "utmi_clk" renamed "utmi" as per Krzysztof comment on dt-bindings
---
arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4e437d3f2ed6..63f4c78fcc1d 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1130,8 +1130,8 @@ sdmmc3: mmc@48004000 {
usbotg_hs: usb-otg@49000000 {
compatible = "st,stm32mp15-hsotg", "snps,dwc2";
reg = <0x49000000 0x10000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
+ clocks = <&rcc USBO_K>, <&usbphyc>;
+ clock-names = "otg", "utmi";
resets = <&rcc USBO_R>;
reset-names = "dwc2";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1
\
 
 \ /
  Last update: 2023-04-14 10:43    [W:0.081 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site