lkml.org 
[lkml]   [2023]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH v1 4/4] ufs: mcq: Added ufshcd_mcq_abort()
From
On 3/8/2023 10:21 PM, Stanley Chu wrote:
> Hi Bao,
>
> On Thu, Mar 9, 2023 at 1:31 PM Bao D. Nguyen <quic_nguyenb@quicinc.com> wrote:
>> On 3/8/2023 7:10 PM, Stanley Chu wrote:
>>> Hi Bao,
>>>
>>> On Wed, Mar 8, 2023 at 12:10 PM Bao D. Nguyen <quic_nguyenb@quicinc.com> wrote:
>>>> Add ufshcd_mcq_abort() to support ufs abort in mcq mode.
>>>>
>>>> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
>>>> ---
>>>> drivers/ufs/core/ufs-mcq.c | 76 ++++++++++++++++++++++++++++++++++++++++++
>>>> drivers/ufs/core/ufshcd-priv.h | 5 ++-
>>>> drivers/ufs/core/ufshcd.c | 11 ++++--
>>>> 3 files changed, 88 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
>>>> index e27d8eb..6c65cd5 100644
>>>> --- a/drivers/ufs/core/ufs-mcq.c
>>>> +++ b/drivers/ufs/core/ufs-mcq.c
>>>> @@ -646,3 +646,79 @@ static bool ufshcd_mcq_cqe_search(struct ufs_hba *hba,
>>>> spin_unlock(&hwq->cq_lock);
>>>> return ret;
>>>> }
>>>> +
>>>> +/**
>>>> + * ufshcd_mcq_abort - Abort the command in MCQ.
>>>> + * @cmd - The command to be aborted.
>>>> + *
>>>> + * Returns SUCCESS or FAILED error codes
>>>> + */
>>>> +int ufshcd_mcq_abort(struct scsi_cmnd *cmd)
>>>> +{
>>>> + struct Scsi_Host *host = cmd->device->host;
>>>> + struct ufs_hba *hba = shost_priv(host);
>>>> + int tag = scsi_cmd_to_rq(cmd)->tag;
>>>> + struct ufshcd_lrb *lrbp = &hba->lrb[tag];
>>>> + struct ufs_hw_queue *hwq;
>>>> + int err = FAILED;
>>>> +
>>>> + if (!lrbp->cmd) {
>>>> + dev_err(hba->dev,
>>>> + "%s: skip abort. cmd at tag %d already completed.\n",
>>>> + __func__, tag);
>>>> + goto out;
>>>> + }
>>>> +
>>>> + /* Skip task abort in case previous aborts failed and report failure */
>>>> + if (lrbp->req_abort_skip) {
>>>> + dev_err(hba->dev, "%s: skip abort. tag %d failed earlier\n",
>>>> + __func__, tag);
>>>> + goto out;
>>>> + }
>>>> +
>>>> + hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd));
>>>> +
>>>> + if (ufshcd_mcq_sqe_search(hba, hwq, tag)) {
>>>> + /*
>>>> + * Failure. The command should not be "stuck" in SQ for
>>>> + * a long time which resulted in command being aborted.
>>>> + */
>>>> + dev_err(hba->dev, "%s: cmd found in sq. hwq=%d, tag=%d\n",
>>>> + __func__, hwq->id, tag);
>>>> + /* Set the Command Type to 0xF per the spec */
>>>> + ufshcd_mcq_nullify_cmd(hba, hwq);
>>>> + goto out;
>>>> + }
>>>> +
>>>> + if (ufshcd_mcq_cqe_search(hba, hwq, tag)) {
>>>> + dev_err(hba->dev, "%s: cmd found in cq. hwq=%d, tag=%d\n",
>>>> + __func__, hwq->id, tag);
>>>> + /*
>>>> + * The command should not be 'stuck' in the CQ for such a long time.
>>>> + * Is interrupt missing? Process the CQEs here. If the interrupt is
>>>> + * invoked at a later time, the CQ will be empty because the CQEs
>>>> + * are already processed here.
>>>> + */
>>>> + ufshcd_mcq_poll_cqe_lock(hba, hwq);
>>>> + err = SUCCESS;
>>>> + goto out;
>>>> + }
>>>> +
>>>> + /*
>>>> + * The command is not in the Submission Queue, and it is not
>>>> + * in the Completion Queue either. Query the device to see if
>>>> + * the command is being processed in the device.
>>>> + */
>>>> + if (ufshcd_try_to_abort_task(hba, tag)) {
>>>> + dev_err(hba->dev, "%s: device abort failed %d\n", __func__, err);
>>>> + lrbp->req_abort_skip = true;
>>>> + goto out;
>>>> + }
>>>> +
>>>> + err = SUCCESS;
>>>> + if (lrbp->cmd)
>>>> + ufshcd_release_scsi_cmd(hba, lrbp);
>>>> +
>>>> +out:
>>>> + return err;
>>>> +}
>>>> diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
>>>> index 0527926..d883c03 100644
>>>> --- a/drivers/ufs/core/ufshcd-priv.h
>>>> +++ b/drivers/ufs/core/ufshcd-priv.h
>>>> @@ -77,7 +77,10 @@ unsigned long ufshcd_mcq_poll_cqe_lock(struct ufs_hba *hba,
>>>> struct ufs_hw_queue *hwq);
>>>>
>>>> int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag, int *result);
>>>> -
>>>> +int ufshcd_mcq_abort(struct scsi_cmnd *cmd);
>>>> +int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
>>>> +void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
>>>> + struct ufshcd_lrb *lrbp);
>>>> #define UFSHCD_MCQ_IO_QUEUE_OFFSET 1
>>>> #define SD_ASCII_STD true
>>>> #define SD_RAW false
>>>> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
>>>> index 408c16c..e06399e 100644
>>>> --- a/drivers/ufs/core/ufshcd.c
>>>> +++ b/drivers/ufs/core/ufshcd.c
>>>> @@ -302,7 +302,6 @@ static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on);
>>>> static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on);
>>>> static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
>>>> struct ufs_vreg *vreg);
>>>> -static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
>>>> static void ufshcd_wb_toggle_buf_flush_during_h8(struct ufs_hba *hba,
>>>> bool enable);
>>>> static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
>>>> @@ -5414,7 +5413,7 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
>>>> }
>>>>
>>>> /* Release the resources allocated for processing a SCSI command. */
>>>> -static void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
>>>> +void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
>>>> struct ufshcd_lrb *lrbp)
>>>> {
>>>> struct scsi_cmnd *cmd = lrbp->cmd;
>>>> @@ -7340,7 +7339,7 @@ static void ufshcd_set_req_abort_skip(struct ufs_hba *hba, unsigned long bitmap)
>>>> *
>>>> * Returns zero on success, non-zero on failure
>>>> */
>>>> -static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)
>>>> +int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)
>>>> {
>>>> struct ufshcd_lrb *lrbp = &hba->lrb[tag];
>>>> int err = 0;
>>>> @@ -7500,6 +7499,12 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>>>> goto release;
>>>> }
>>>>
>>>> + if (is_mcq_enabled(hba)) {
>>>> + /* MCQ mode. Branch off to handle abort for mcq mode */
>>>> + err = ufshcd_mcq_abort(cmd);
>>>> + goto release;
>>>> + }
>>>> +
>>>> /* Skip task abort in case previous aborts failed and report failure */
>>>> if (lrbp->req_abort_skip) {
>>>> dev_err(hba->dev, "%s: skipping abort\n", __func__);
>>>> --
>>>> 2.7.4
>>>>
>>> It seems that ufshcd_abort_all() also needs an error handling flow for MCQ.
>> Hi Stanley, thank you for the reviews.
>>
>> I am not able to find the function ufshcd_abort_all() in the drivers/ufs
>> directory. Can you please clarify where this function is located? Thanks.
> The function ufshcd_abort_all() was introduced in the following link:
> https://android.googlesource.com/kernel/common/+/b817e6ffbad7a1a0a5ca5bb7d4020823c3f4d9d0

Ah ok. Thank you for this info. The ufshcd_abort_all() is in
ufshcd_err_handler(), it is unrelated to the ufshcd_abort().

Adding MCQ support to ufshcd_err_handler() will be in a separate patch.

> Can you confirm if these patches are based on the latest kernel
> 6.3-rc1 or the latest linux-next tree?
>
> Thanks,
> Stanley
>
>>> Thanks,
>>> Stanley
>>

\
 
 \ /
  Last update: 2023-03-27 00:51    [W:0.043 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site