lkml.org 
[lkml]   [2023]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/28] qed: Drop redundant pci_enable_pcie_error_reporting()
Date
From: Bjorn Helgaas <bhelgaas@google.com>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 9 ---------
1 file changed, 9 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index c91898be7c03..f5af83342856 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -23,7 +23,6 @@
#include <linux/qed/qed_if.h>
#include <linux/qed/qed_ll2_if.h>
#include <net/devlink.h>
-#include <linux/aer.h>
#include <linux/phylink.h>

#include "qed.h"
@@ -259,8 +258,6 @@ static void qed_free_pci(struct qed_dev *cdev)
{
struct pci_dev *pdev = cdev->pdev;

- pci_disable_pcie_error_reporting(pdev);
-
if (cdev->doorbells && cdev->db_size)
iounmap(cdev->doorbells);
if (cdev->regview)
@@ -366,12 +363,6 @@ static int qed_init_pci(struct qed_dev *cdev, struct pci_dev *pdev)
return -ENOMEM;
}

- /* AER (Advanced Error reporting) configuration */
- rc = pci_enable_pcie_error_reporting(pdev);
- if (rc)
- DP_VERBOSE(cdev, NETIF_MSG_DRV,
- "Failed to configure PCIe AER [%d]\n", rc);
-
return 0;

err2:
--
2.25.1
\
 
 \ /
  Last update: 2023-03-27 00:47    [W:0.141 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site