lkml.org 
[lkml]   [2023]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] arm64: dts: imx8mp-verdin: correct off-on-delay
Date
From: Peng Fan <peng.fan@nxp.com>

The property should be off-on-delay-us, not off-on-delay

Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index 096a6f2300f9..bdfdd4c782f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -10,7 +10,7 @@ reg_eth2phy: regulator-eth2phy {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
- off-on-delay = <500000>;
+ off-on-delay-us = <500000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "+V3.3_ETH";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 00faaf9a02b2..e9e4fcb562f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -87,7 +87,7 @@ reg_module_eth1phy: regulator-module-eth1phy {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
- off-on-delay = <500000>;
+ off-on-delay-us = <500000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_eth>;
regulator-always-on;
@@ -128,7 +128,7 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
enable-active-high;
/* Verdin SD_1_PWR_EN (SODIMM 76) */
gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- off-on-delay = <100000>;
+ off-on-delay-us = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
regulator-max-microvolt = <3300000>;
--
2.37.1
\
 
 \ /
  Last update: 2023-03-28 08:15    [W:0.046 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site