lkml.org 
[lkml]   [2023]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] ARM: dts: sunxi: add MangoPi MQ-R-T113 board
Date
The MangoPi MQ-R-T113 is a small SBC with the Allwinner T113-s3 SoC.
The SoC features two Arm Cortex-A7 cores and 128 MB of co-packaged DDR3
DRAM. The board adds mostly connectors and the required regulators, plus
a Realtek RTL8189FTV WiFi chip.
Power comes in via a USB-C connector wired as a peripheral, and there is
a second USB-C connector usable as a host port.

Add a .dtsi file describing most of the board's peripherals, and include
that from the actual board .dts file. This allows to re-use the .dtsi
for the MQ-R-F113 RISC-V variant of that board.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/sun8i-t113s-mangopi-mq-r-t113.dts | 35 +++++
.../boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi | 126 ++++++++++++++++++
3 files changed, 162 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
create mode 100644 arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846d..3367e24146da8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1397,6 +1397,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-s3-elimo-initium.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
+ sun8i-t113s-mangopi-mq-r-t113.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v3-sl631-imx179.dtb \
sun8i-v3s-licheepi-zero.dtb \
diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 0000000000000..94e24b5926dd7
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+ model = "MangoPi MQ-R-T113";
+ compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+ aliases {
+ ethernet0 = &rtl8189ftv;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+ rtl8189ftv: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+ interrupt-names = "host-wake";
+ };
+};
diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 0000000000000..e9bc749488bb2
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+ };
+ };
+
+ /* board wide 5V supply directly from the USB-C socket */
+ reg_vcc5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ /* SY8008 DC/DC regulator on the board */
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_vcc5v>;
+ };
+
+ /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+ reg_vcc_core: regulator-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-core";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ vin-supply = <&reg_vcc5v>;
+ };
+
+ /* XC6206 LDO on the board */
+ reg_avdd2v8: regulator-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&reg_3v3>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&reg_3v3>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&reg_3v3>;
+ non-removable;
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <&reg_3v3>;
+ vcc-pd-supply = <&reg_3v3>;
+ vcc-pe-supply = <&reg_avdd2v8>;
+ vcc-pf-supply = <&reg_3v3>;
+ vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pb_pins>;
+ status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_vcc5v>;
+ status = "okay";
+};
--
2.35.7
\
 
 \ /
  Last update: 2023-03-27 01:07    [W:0.142 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site