lkml.org 
[lkml]   [2023]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 03/15] mfd: Add the header file of Nuvoton ma35d1 system manager
From

Hi Ilpo,


On 2023/3/16 下午 09:30, Ilpo Järvinen wrote:
> On Wed, 15 Mar 2023, Jacky Huang wrote:
>
>> From: Jacky Huang <ychuang3@nuvoton.com>
>>
>> The system manager is a set of registers used for power control,
>> multi-function pin control, USB phy control, IP reset, and other
>> miscellaneous controls. It also contains some registers that
>> provide SoC information and status.
>>
>> Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
>> ---
>> include/linux/mfd/ma35d1-sys.h | 95 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 95 insertions(+)
>> create mode 100644 include/linux/mfd/ma35d1-sys.h
>>
>> diff --git a/include/linux/mfd/ma35d1-sys.h b/include/linux/mfd/ma35d1-sys.h
>> new file mode 100644
>> index 000000000000..dcd85231125d
>> --- /dev/null
>> +++ b/include/linux/mfd/ma35d1-sys.h
>> @@ -0,0 +1,95 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (C) 2023 Nuvoton Technologies.
>> + * Author: Chi-Fen Li <cfli0@nuvoton.com>
>> + *
>> + * System management control registers of MA35D1 SoC
>> + */
>> +#ifndef __LINUX_MFD_MA35D1_SYS_H
>> +#define __LINUX_MFD_MA35D1_SYS_H
>> +
>> +#define REG_SYS_PDID (0x000) /* Product and Device Identifier */
>> +#define REG_SYS_PWRONOTP (0x004) /* Power-on Setting OTP Source */
>> +#define REG_SYS_PWRONPIN (0x008) /* Power-on Setting Pin Source */
>> +#define REG_SYS_RSTSTS (0x010) /* Reset Source Active Status */
>> +#define REG_SYS_MISCRFCR (0x014) /* Miscellaneous Reset Function */
>> +#define REG_SYS_RSTDEBCTL (0x018) /* Reset Pin De-bounce Control */
>> +#define REG_SYS_LVRDCR (0x01C) /* Low Voltage Reset & Detect */
>> +#define REG_SYS_IPRST0 (0x020) /* Reset Control Register 0 */
>> +#define REG_SYS_IPRST1 (0x024) /* Reset Control Register 1 */
>> +#define REG_SYS_IPRST2 (0x028) /* Reset Control Register 2 */
>> +#define REG_SYS_IPRST3 (0x02C) /* Reset Control Register 3 */
>> +#define REG_SYS_PMUCR (0x030) /* Power Management Unit Control */
>> +#define REG_SYS_DDRCQCSR (0x034) /* DDR Q Channel Control and Status */
>> +#define REG_SYS_PMUIEN (0x038) /* PMU Interrupt Enable */
>> +#define REG_SYS_PMUSTS (0x03C) /* PMU Status */
>> +#define REG_SYS_CA35WRBADR1 (0x040) /* A35 Core 1 Warm-boot Address */
>> +#define REG_SYS_CA35WRBPAR1 (0x044) /* A35 Core 1 Warm-boot Parameter */
>> +#define REG_SYS_CA35WRBADR2 (0x048) /* A35 Core 2 Warm-boot Address */
>> +#define REG_SYS_CA35WRBPAR2 (0x04C) /* A35 Core 2 Warm-boot Parameter */
>> +#define REG_SYS_USBPMISCR (0x060) /* USB PHY Miscellaneous Control */
>> +#define REG_SYS_USBP0PCR (0x064) /* USB Port 0 PHY Control */
>> +#define REG_SYS_USBP1PCR (0x068) /* USB Port 1 PHY Control */
>> +#define REG_SYS_MISCFCR0 (0x070) /* Miscellaneous Function Control 0 */
>> +#define REG_SYS_MISCFCR1 (0x074) /* Miscellaneous Function Control 1 */
>> +#define REG_SYS_MISCIER (0x078) /* Miscellaneous Interrupt Enable */
>> +#define REG_SYS_MISCISR (0x07C) /* Miscellaneous Interrupt Status */
>> +#define REG_SYS_GPA_MFPL (0x080) /* GPIOA Multi-Function Control LSB */
>> +#define REG_SYS_GPA_MFPH (0x084) /* GPIOA Multi-Function Control MSB */
>> +#define REG_SYS_GPB_MFPL (0x088) /* GPIOB Multi-Function Control LSB */
>> +#define REG_SYS_GPB_MFPH (0x08C) /* GPIOB Multi-Function Control MSB */
>> +#define REG_SYS_GPC_MFPL (0x090) /* GPIOC Multi-Function Control LSB */
>> +#define REG_SYS_GPC_MFPH (0x094) /* GPIOC Multi-Function Control MSB */
>> +#define REG_SYS_GPD_MFPL (0x098) /* GPIOD Multi-Function Control LSB */
>> +#define REG_SYS_GPD_MFPH (0x09C) /* GPIOD Multi-Function Control MSB */
>> +#define REG_SYS_GPE_MFPL (0x0A0) /* GPIOE Multi-Function Control LSB */
>> +#define REG_SYS_GPE_MFPH (0x0A4) /* GPIOE Multi-Function Control MSB */
>> +#define REG_SYS_GPF_MFPL (0x0A8) /* GPIOF Multi-Function Control LSB */
>> +#define REG_SYS_GPF_MFPH (0x0AC) /* GPIOF Multi-Function Control MSB */
>> +#define REG_SYS_GPG_MFPL (0x0B0) /* GPIOG Multi-Function Control LSB */
>> +#define REG_SYS_GPG_MFPH (0x0B4) /* GPIOG Multi-Function Control MSB */
>> +#define REG_SYS_GPH_MFPL (0x0B8) /* GPIOH Multi-Function Control LSB */
>> +#define REG_SYS_GPH_MFPH (0x0BC) /* GPIOH Multi-Function Control MSB */
>> +#define REG_SYS_GPI_MFPL (0x0C0) /* GPIOI Multi-Function Control LSB */
>> +#define REG_SYS_GPI_MFPH (0x0C4) /* GPIOI Multi-Function Control MSB */
>> +#define REG_SYS_GPJ_MFPL (0x0C8) /* GPIOJ Multi-Function Control LSB */
>> +#define REG_SYS_GPJ_MFPH (0x0CC) /* GPIOJ Multi-Function Control MSB */
>> +#define REG_SYS_GPK_MFPL (0x0D0) /* GPIOK Multi-Function Control LSB */
>> +#define REG_SYS_GPK_MFPH (0x0D4) /* GPIOK Multi-Function Control MSB */
>> +#define REG_SYS_GPL_MFPL (0x0D8) /* GPIOL Multi-Function Control LSB */
>> +#define REG_SYS_GPL_MFPH (0x0DC) /* GPIOL Multi-Function Control MSB */
>> +#define REG_SYS_GPM_MFPL (0x0E0) /* GPIOM Multi-Function Control LSB */
>> +#define REG_SYS_GPM_MFPH (0x0E4) /* GPIOM Multi-Function Control MSB */
>> +#define REG_SYS_GPN_MFPL (0x0E8) /* GPION Multi-Function Control LSB */
>> +#define REG_SYS_GPN_MFPH (0x0EC) /* GPION Multi-Function Control MSB */
>> +#define REG_SYS_HIRCFTRIM (0x100) /* HIRC Frequency Trim Value */
>> +#define REG_SYS_TSENSRFCR (0x104) /* Temperature Sensor Control */
>> +#define REG_SYS_GMAC0MISCR (0x108) /* GMAC 0 Miscellaneous Control */
>> +#define REG_SYS_GMAC1MISCR (0x10C) /* GMAC 1 Miscellaneous Control */
>> +#define REG_SYS_MACAD0LSR (0x110) /* MAC Address 0 LSW */
>> +#define REG_SYS_MACAD0HSR (0x114) /* MAC Address 0 HSW */
>> +#define REG_SYS_MACAD1LSR (0x118) /* MAC Address 1 LSW */
>> +#define REG_SYS_MACAD1HSR (0x11C) /* MAC Address 1 HSW */
>> +#define REG_SYS_CSDBGCTL (0x120) /* CoreSight Debug Control */
>> +#define REG_SYS_GPAB_MFOS (0x140) /* GPIOA/B Output Mode Select */
>> +#define REG_SYS_GPCD_MFOS (0x144) /* GPIOC/D Output Mode Select */
>> +#define REG_SYS_GPEF_MFOS (0x148) /* GPIOE/F Output Mode Select */
>> +#define REG_SYS_GPGH_MFOS (0x14C) /* GPIOG/H Output Mode Select */
>> +#define REG_SYS_GPIJ_MFOS (0x150) /* GPIOI/J Output Mode Select */
>> +#define REG_SYS_GPKL_MFOS (0x154) /* GPIOK/L Output Mode Select */
>> +#define REG_SYS_GPMN_MFOS (0x158) /* GPIOM/N Output Mode Select */
>> +#define REG_SYS_UID0 (0x180) /* Unique Identifier Word 0 */
>> +#define REG_SYS_UID1 (0x184) /* Unique Identifier Word 1 */
>> +#define REG_SYS_UID2 (0x188) /* Unique Identifier Word 2 */
>> +#define REG_SYS_UCID0 (0x190) /* Unique Customer Identifier 0 */
>> +#define REG_SYS_UCID1 (0x194) /* Unique Customer Identifier 1 */
>> +#define REG_SYS_UCID2 (0x198) /* Unique Customer Identifier 2 */
>> +#define REG_SYS_RLKTZS (0x1A0) /* TZS Register Lock Control */
>> +#define REG_SYS_RLKTZNS (0x1A4) /* TZNS Register Lock Control */
>> +#define REG_SYS_RLKSUBM (0x1A8) /* SubM Register Lock Control */
>> +#define REG_SYS_DPLPASWD (0x1B0) /* Deployed Password */
> Remove the extra set of parenthesis from all those above. Hex numbers are
> easier to read with lowercased letters so please convert them all to
> lowercase.
>

Got it. I will remove parenthesis and use lower case hex instead.

Best regards,

Jacky Huang


\
 
 \ /
  Last update: 2023-03-27 01:05    [W:0.201 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site