lkml.org 
[lkml]   [2023]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
On Mon, Feb 06, 2023 at 06:48:16PM -0800, Douglas Anderson wrote:
> On older revisions of evoker, the touchscreen was either
> non-functional or needed special hardware magic to get it talking
> properly. It's been decided that the proper way going forward is to
> use L3C to power some buffers on the QCard and then configure the
> touchscreens for 1.8V. Let's do that.
>
> Note that this is safe to do even on older revs even if it might not
> make the touchscreen work there (because they didn't have a properly
> stuffed QCard). As talked about in the patch ("arm64: dts: qcom:
> sc7280: On QCard, regulator L3C should be 1.8V") the L3C regulator
> didn't go anywhere at all on older revs.
>
> This patch relies on the patch ("HID: i2c-hid: goodix: Add
> mainboard-vddio-supply") in order to function properly. Without that
> patch this one won't do any harm but it won't actually accomplish its
> goal.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

\
 
 \ /
  Last update: 2023-03-27 00:14    [W:0.269 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site