lkml.org 
[lkml]   [2023]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/7] HID: i2c-hid: goodix: Add mainboard-vddio-supply
On Mon, Feb 06, 2023 at 06:48:15PM -0800, Douglas Anderson wrote:
> As talked about in the patch ("dt-bindings: HID: i2c-hid: goodix: Add
> mainboard-vddio-supply") we may need to power up a 1.8V rail on the
> host associated with touchscreen IO. Let's add support in the driver
> for it.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

> ---
> Unfortunately, I haven't been able to actually test this on real
> hardware yet. However, the change is very simple, I believe it is
> correct, and it doesn't break other boards I've tested it on.
>
> drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
> index 584d833dc0aa..0060e3dcd775 100644
> --- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
> +++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
> @@ -26,6 +26,7 @@ struct i2c_hid_of_goodix {
> struct i2chid_ops ops;
>
> struct regulator *vdd;
> + struct regulator *vddio;
> struct gpio_desc *reset_gpio;
> const struct goodix_i2c_hid_timing_data *timings;
> };
> @@ -40,6 +41,10 @@ static int goodix_i2c_hid_power_up(struct i2chid_ops *ops)
> if (ret)
> return ret;
>
> + ret = regulator_enable(ihid_goodix->vddio);
> + if (ret)
> + return ret;
> +
> if (ihid_goodix->timings->post_power_delay_ms)
> msleep(ihid_goodix->timings->post_power_delay_ms);
>
> @@ -56,6 +61,7 @@ static void goodix_i2c_hid_power_down(struct i2chid_ops *ops)
> container_of(ops, struct i2c_hid_of_goodix, ops);
>
> gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
> + regulator_disable(ihid_goodix->vddio);
> regulator_disable(ihid_goodix->vdd);
> }
>
> @@ -81,6 +87,10 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client)
> if (IS_ERR(ihid_goodix->vdd))
> return PTR_ERR(ihid_goodix->vdd);
>
> + ihid_goodix->vddio = devm_regulator_get(&client->dev, "mainboard-vddio");
> + if (IS_ERR(ihid_goodix->vddio))
> + return PTR_ERR(ihid_goodix->vddio);
> +
> ihid_goodix->timings = device_get_match_data(&client->dev);
>
> return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
> --
> 2.39.1.519.gcb327c4b5f-goog
>

--
Dmitry

\
 
 \ /
  Last update: 2023-03-27 00:12    [W:0.408 / U:4.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site