lkml.org 
[lkml]   [2023]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
Date
For regulators with 'off-on-delay-us' the regulator framework currently
uses ktime_get() to determine how long the regulator has been off
before re-enabling it (after a delay if needed). A problem with using
ktime_get() is that it doesn't account for the time the system is
suspended. As a result a regulator with a longer 'off-on-delay' (e.g.
500ms) that was switched off during suspend might still incurr in a
delay on resume before it is re-enabled, even though the regulator
might have been off for hours. ktime_get_boottime() accounts for
suspend time, use it instead of ktime_get().

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

drivers/regulator/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ae69e493913d..4fcd36055b02 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1584,7 +1584,7 @@ static int set_machine_constraints(struct regulator_dev *rdev)
}

if (rdev->desc->off_on_delay)
- rdev->last_off = ktime_get();
+ rdev->last_off = ktime_get_boottime();

/* If the constraints say the regulator should be on at this point
* and we have control then make sure it is enabled.
@@ -2673,7 +2673,7 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
* this regulator was disabled.
*/
ktime_t end = ktime_add_us(rdev->last_off, rdev->desc->off_on_delay);
- s64 remaining = ktime_us_delta(end, ktime_get());
+ s64 remaining = ktime_us_delta(end, ktime_get_boottime());

if (remaining > 0)
_regulator_delay_helper(remaining);
@@ -2912,7 +2912,7 @@ static int _regulator_do_disable(struct regulator_dev *rdev)
}

if (rdev->desc->off_on_delay)
- rdev->last_off = ktime_get();
+ rdev->last_off = ktime_get_boottime();

trace_regulator_disable_complete(rdev_get_name(rdev));

--
2.39.2.722.g9855ee24e9-goog
\
 
 \ /
  Last update: 2023-03-27 00:32    [W:0.045 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site