Messages in this thread | | | Date | Wed, 22 Feb 2023 19:30:29 +0100 | Subject | Re: [PATCH 2/2] dt-bindings: display: Add Loongson display controller | From | Krzysztof Kozlowski <> |
| |
On 22/02/2023 17:55, suijingfeng wrote: > This patch add a trival DT usages for loongson display controller found > in LS2k1000 SoC.
Trivial yet so many things to improve... if you only started from recent kernel tree (since you Cced wrong address, I doubt you did) and bindings you would avoid half of these comments.
> > Signed-off-by: suijingfeng <suijingfeng@loongson.cn> > --- > .../loongson/loongson,display-controller.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > new file mode 100644 > index 000000000000..98b78f449a80 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
Filename based on compatible, so "loongson,ls2k1000-dc.yaml"
> @@ -0,0 +1,58 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Loongson Display Controller Device Tree Bindings
Drop "Device Tree Bindings"
> + > +maintainers: > + - Sui Jingfeng <suijingfeng@loongson.cn> > + > +description: |+
Drop |+
> +
No need for blank line. Do you see it anywhere else in the bindings?
> + The display controller is a PCI device, it has two display pipe. > + For the DC in LS2K1000 each way has a DVO output interface which > + provide RGB888 signals, vertical & horizontal synchronisations > + and the pixel clock. Each CRTC is able to support 1920x1080@60Hz, > + the maximum resolution is 2048x2048 according to the hardware spec. > + > +properties: > + $nodename: > + pattern: "^display-controller@[0-9a-f],[0-9a-f]$"
Drop nodename.
> + > + compatible: > + oneOf:
Drop oneOf
> + - items:
and items...
> + - enum: > + - loongson,ls2k1000-dc > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + bus { > +
Drop blank line.
> + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <2>;
Why do you need interrupt-cells?
> + > + display-controller@6,0 { > + compatible = "loongson,ls2k1000-dc"; > + reg = <0x3000 0x0 0x0 0x0 0x0>;> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; > + }; > + }; > + > +...
Best regards, Krzysztof
| |