lkml.org 
[lkml]   [2023]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] clk: qcom: restrict drivers per ARM/ARM64
From
On 10/02/2023 23:32, Stephen Boyd wrote:
>>
>> If DTSI (and/or board DTS) is in arm64, you still need DTS or a link in
>> arm directory. If such one is added, then the restrictions here can be
>> removed. Have in mind that I did the same already for pinctrl.
>>
>
> I'm saying that you put the dts file in arch/arm64/boot/dts/, compile
> the dts to a dtb and stick it on a board that boots the kernel in arm32
> mode. If it is possible to boot the dtb on a CPU running in arm32 mode
> then this restriction should be loosened to
>
> depends on ARM || ARM64 || COMPILE_TEST

I get your point. I don't think we consider this as use case at all,
especially that we are changing some of the boards from address-cells=1
to 2. Also whatever is happening out-of-tree it's out-of-tree problem.
If we want to support such case, then the DTS would have to be in
arch/arm directory (like we do for few boards).

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-03-27 00:18    [W:0.046 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site