lkml.org 
[lkml]   [2023]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 00/11] renesas: rzg3s: Add support for Ethernet
    Date
    From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

    Hi,

    Series adds Ethernet support for Renesas RZ/G3S.
    Along with it preparatory cleanups and fixes were included.

    Patches 1-2 are clock specific.
    Patches 3-7 are pinctrl specific.
    Patches 8-11 are device tree specific.

    It is expected that patches will be integrated though Geert's tree.

    Thank you,
    Claudiu Beznea

    Changes in v2:
    - patches 1/14 and 14/14 from v1 were integrated thus, didn't include
    them in this version
    - dropped patch 3/14 "clk: renesas: rzg2l-cpg: Add support for MSTOP"
    from v1 and associated changes; a follow up will be done on it after
    the current series will be accepted
    - addressed review comments
    - fixed typos in commit title and description
    - collected tags
    - removed IEN functinality form patch 6/12 and added it in a separate patch
    (patch 7/12)
    - patch 11/14] "arm64: renesas: rzg3s-smarc-som: Invert the logic for
    SW_SD2_EN macro from" from v1 was replaced by patch 10/11 in this
    version "arm64: renesas: rzg3s-smarc-som: Use switches' names
    to select on-board functionalities"

    Claudiu Beznea (11):
    clk: renesas: rzg2l-cpg: Check reset monitor registers
    clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and
    ETH1
    pinctrl: renesas: rzg2l: Move arg and index in the main function block
    pinctrl: renesas: rzg2l: Add pin configuration support for pinmux
    groups
    pinctrl: renesas: rzg2l: Add support to select power source for
    Ethernet pins
    pinctrl: renesas: rzg2l: Add output enable support
    pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
    dt-bindings: net: renesas,etheravb: Document RZ/G3S support
    arm64: renesas: r9a08g045: Add the Ethernet nodes
    arm64: renesas: rzg3s-smarc-som: Use switches' names to select
    on-board functionalities
    arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces

    .../bindings/net/renesas,etheravb.yaml | 1 +
    arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 38 ++++
    .../boot/dts/renesas/rzg3s-smarc-som.dtsi | 173 ++++++++++++++++--
    drivers/clk/renesas/r9a08g045-cpg.c | 10 +
    drivers/clk/renesas/rzg2l-cpg.c | 59 ++++--
    drivers/pinctrl/renesas/pinctrl-rzg2l.c | 164 +++++++++++++++--
    6 files changed, 398 insertions(+), 47 deletions(-)

    --
    2.39.2

    \
     
     \ /
      Last update: 2023-12-07 08:09    [W:5.490 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site