lkml.org 
[lkml]   [2023]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] drm/solomon: Add support for the SSD133x controller family
Date
Hello,

This patch-set adds support for the family of SSD133x Solomon controllers,
such as the SSD1331. These are used for RGB Dot Matrix OLED/PLED panels.

This is a v2 that addresses issues pointed out in v1:

https://lore.kernel.org/lkml/20231217100741.1943932-2-javierm@redhat.com/T/

The patches were tested on a Waveshare SSD1331 display using glmark2-drm,
fbcon, fbtests and the retroarch emulator.

Patch #1 adds a DT binding schema for the SSD133x controllers and patch #2
extends the ssd130x DRM driver to support the SSD133x controller family.

Best regards,
Javier

Changes in v2:
- Unconditionally set the width and height constraints (Conor Dooley).
- Fix indentation in the DTS examples (Krzysztof Kozlowski).

Javier Martinez Canillas (2):
dt-bindings: display: Add SSD133x OLED controllers
drm/ssd130x: Add support for the SSD133x OLED controller family

.../bindings/display/solomon,ssd133x.yaml | 57 +++
drivers/gpu/drm/solomon/ssd130x-i2c.c | 5 +
drivers/gpu/drm/solomon/ssd130x-spi.c | 7 +
drivers/gpu/drm/solomon/ssd130x.c | 370 ++++++++++++++++++
drivers/gpu/drm/solomon/ssd130x.h | 5 +-
5 files changed, 443 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd133x.yaml

--
2.43.0


\
 
 \ /
  Last update: 2023-12-18 14:28    [W:0.374 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site