lkml.org 
[lkml]   [2023]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: SoC button array: add mapping for airplane mode button
Date
From: Christoffer Sandberg <cs@tuxedo.de>

This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.

While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event is
used here. Besides this behaviour it uses the HID usage-id 0xc6 (Wireless
Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but since
neither 0xc6 nor 0xc8 are currently implemented at all in soc_button_array
this not to standard behaviour is not put behind a quirk for the moment.

Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
drivers/input/misc/soc_button_array.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 08bcee3d6bcca..f6d060377d189 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -299,6 +299,11 @@ static int soc_button_parse_btn_desc(struct device *dev,
info->name = "power";
info->event_code = KEY_POWER;
info->wakeup = true;
+ } else if (upage == 0x01 && usage == 0xc6) {
+ info->name = "airplane mode switch";
+ info->event_type = EV_SW;
+ info->event_code = SW_RFKILL_ALL;
+ info->active_low = false;
} else if (upage == 0x01 && usage == 0xca) {
info->name = "rotation lock switch";
info->event_type = EV_SW;
--
2.34.1

\
 
 \ /
  Last update: 2023-12-15 18:30    [W:0.127 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site