lkml.org 
[lkml]   [2023]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12 2/4] Input: add core support for Goodix Berlin Touchscreen IC
Hi Dmitry,

On 10/12/2023 07:53, Dmitry Torokhov wrote:
> Hi Neil,
>
> On Sat, Dec 09, 2023 at 08:33:40AM +0100, Neil Armstrong wrote:
>> Add initial support for the new Goodix "Berlin" touchscreen ICs.
>>
>> These touchscreen ICs support SPI, I2C and I3C interface, up to
>> 10 finger touch, stylus and gestures events.
>>
>> This initial driver is derived from the Goodix goodix_ts_berlin
>> available at [1] and [2] and only supports the GT9916 IC
>> present on the Qualcomm SM8550 MTP & QRD touch panel.
>>
>> The current implementation only supports BerlinD, aka GT9916.
>>
>> Support for advanced features like:
>> - Firmware & config update
>> - Stylus events
>> - Gestures events
>> - Previous revisions support (BerlinA or BerlinB)
>> is not included in current version.
>>
>> The current support will work with currently flashed firmware
>> and config, and bail out if firmware or config aren't flashed yet.
>>
>> [1] https://github.com/goodix/goodix_ts_berlin
>> [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
>>
>> Reviewed-by: Jeff LaBundy <jeff@labundy.com>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>
> Thank you for resending the patch. I think there is an issue in how you
> read and parse the data in case of more than 2 fingers. It looks like in
> that case you are overwriting the checksum form the first 2 and then not
> reading the new checksum but use some garbage past the touch data. I
> might be mistaken though...

Sure, let me check again to be sure it's not the case

>
> I also believe you are leaking afe_data in case of success. We have the
> newfangled __free(kfree) from cleanup.h that should help there.

Indeed, it was added in the meantime, so let's switch to it

>
> Another request - we should not have anything in goodix_berlin.h that is
> not used by the I2C and SPI sub-drivers, so the only thing it should
> contain is goodix_berlin_probe() declaration and dev_pm_ops. All other
> defines and definitions should go to goodix_berlin_core.h.
>
> I made a few more cosmetic changes in the attached patch, please
> consider applying it.

Sure, I'll apply it, thanks for the suggestions,

Neil

>
> Thanks.
>

\
 
 \ /
  Last update: 2023-12-11 10:32    [W:0.054 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site