lkml.org 
[lkml]   [2023]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 3/3] arm64: dts: cn913x: add device trees for COM Express boards
On Mon, Dec 11, 2023 at 07:17:39PM +0200, Elad Nachman wrote:
> From: Elad Nachman <enachman@marvell.com>
>
> Add support for CN9130 and CN9131 COM Express Type 7 CPU
> module boards by Marvell.
> Define these COM Express CPU modules as dtsi and
> provide a dtsi file for a carrier board (Marvell AC5X RD
> COM Express type 7 carrier board).
> This Carrier board only utilizes the PCIe link, hence no
> special device / driver support is provided by this dtsi file.
> Finally, provide a dts file for the com express carrier and
> CPU module combination.
>
> These COM Express boards differ from the existing CN913x DB
> boards by the type of ethernet connection (RGMII),
> the type of voltage regulators (not i2c expander based)
> and the USB phy (not UTMI based).
> Note - PHY + RGMII connector is OOB on CPU module.
> CN9131 COM Express board is basically CN9130 COM Express board
> with an additional CP115 I/O co-processor, which in this case
> provides an additional USB host controller on the board.
>
> Signed-off-by: Elad Nachman <enachman@marvell.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2023-12-11 20:17    [W:0.039 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site