lkml.org 
[lkml]   [2023]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] mmc: meson-mx-sdhc: Fix initialization frozen issue
From
在 2023/11/3 19:15, Ulf Hansson 写道:
> + Anand
>
> On Tue, 10 Oct 2023 at 18:44, Ziyang Huang <hzyitc@outlook.com> wrote:
>>
>> Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending
>> HS CMD13") set HS clock (52MHz) before switching to HS mode. For this
>> freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9).
>> Then we set rx_clk_phase to 11 or 15 which is out of range and make
>> hardware frozen. After we send command request, no irq will be
>> interrupted and the mmc driver will keep to wait for request finished,
>> even durning rebooting.
>>
>> So let's set it to Phase 90 which should work in most cases. Then let
>> meson_mx_sdhc_execute_tuning() to find the accurate value for data
>> transfer.
>>
>> If this doesn't work, maybe need to define a factor in dts.
>>
>> Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
>> Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
>
> Let's give this a try! Although, rather than queuing it as a fix for
> v6.7, I am picking it for v6.8 and adding a stable tag, this should
> allow it to become a bit more tested first.
>
> Kind regards
> Uffe
>
>

Yes, I think any fixes better than now since it's broken and can't work.

\
 
 \ /
  Last update: 2023-11-20 13:48    [W:0.094 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site