lkml.org 
[lkml]   [2023]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] drm/msm/dsi: fix DSC for the bonded DSI case
From
Date
On 11/14/23 1:28 PM, Marijn Suijten wrote:
> On what hardware have you been testing this? Dmitry and I have a stack of
> patches to resolve support for Active CTL programming on newer hardware (DPU
> 5.0+ IIRC), where a single CTL is responsible for programming multiple INTF and
> DSC blocks as used in bonded DSI.
>

I am also using DPU 6+ but I won't be posting patches for DPU to support
this as I am not using the upstream DPU codebase.

> On 2023-11-14 12:42:16, Jonathan Marek wrote:
>> For the bonded DSI case, DSC pic_width and timing calculations should use
>> the width of a single panel instead of the total combined width.
>>
>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>> ---
>> drivers/gpu/drm/msm/dsi/dsi.h | 3 ++-
>> drivers/gpu/drm/msm/dsi/dsi_host.c | 20 +++++++++++---------
>> drivers/gpu/drm/msm/dsi/dsi_manager.c | 2 +-
>> 3 files changed, 14 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
>> index 28379b1af63f..3a641e69447c 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi.h
>> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
>> @@ -93,7 +93,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host);
>> int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
>> const struct drm_display_mode *mode);
>> enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
>> - const struct drm_display_mode *mode);
>> + const struct drm_display_mode *mode,
>> + bool is_bonded_dsi);
>> unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host);
>> int msm_dsi_host_register(struct mipi_dsi_host *host);
>> void msm_dsi_host_unregister(struct mipi_dsi_host *host);
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 7284346ab787..a6286eb9d006 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -938,8 +938,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>> mode->hdisplay, mode->vdisplay);
>> return;
>> }
>> -
>> - dsc->pic_width = mode->hdisplay;
>> + dsc->pic_width = hdisplay;
>
> In my testing and debugging on CMDmode panels downstream this value/register
> was always programmed to the _full_ width of the bonded panel. Is that maybe
> different for video mode?
>

downstream dual DSI panel timings are specified for a single panel
("qcom,mdss-dsi-panel-width" is for a single panel, not both panels)

>> dsc->pic_height = mode->vdisplay;
>> DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
>>
>> @@ -950,6 +949,11 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>> if (ret)
>> return;
>>
>> + if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO)
>> + dsi_update_dsc_timing(msm_host, false, hdisplay);
>> + else
>> + dsi_update_dsc_timing(msm_host, true, hdisplay);
>> +
>
> Such cleanups (which appear unrelated) should probably be posted as separate
> patches.
>
> - Marijn
>

Its not unrelated, dsi_update_dsc_timing call is moved up so it can use
the single-panel "hdisplay" value before it gets adjusted for DSC.

>> /* Divide the display by 3 but keep back/font porch and
>> * pulse width same
>> */
>> @@ -966,9 +970,6 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>> }
>>
>> if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
>> - if (msm_host->dsc)
>> - dsi_update_dsc_timing(msm_host, false, mode->hdisplay);
>> -
>> dsi_write(msm_host, REG_DSI_ACTIVE_H,
>> DSI_ACTIVE_H_START(ha_start) |
>> DSI_ACTIVE_H_END(ha_end));
>> @@ -987,9 +988,6 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>> DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
>> DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
>> } else { /* command mode */
>> - if (msm_host->dsc)
>> - dsi_update_dsc_timing(msm_host, true, mode->hdisplay);
>> -
>> /* image data and 1 byte write_memory_start cmd */
>> if (!msm_host->dsc)
>> wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
>> @@ -2487,7 +2485,8 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
>> }
>>
>> enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
>> - const struct drm_display_mode *mode)
>> + const struct drm_display_mode *mode,
>> + bool is_bonded_dsi)
>> {
>> struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>> struct drm_dsc_config *dsc = msm_host->dsc;
>> @@ -2497,6 +2496,9 @@ enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
>> if (!msm_host->dsc)
>> return MODE_OK;
>>
>> + if (is_bonded_dsi)
>> + pic_width = mode->hdisplay / 2;
>> +
>> if (pic_width % dsc->slice_width) {
>> pr_err("DSI: pic_width %d has to be multiple of slice %d\n",
>> pic_width, dsc->slice_width);
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> index 896f369fdd53..2ca1a7ca3659 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> @@ -455,7 +455,7 @@ static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
>> return MODE_ERROR;
>> }
>>
>> - return msm_dsi_host_check_dsc(host, mode);
>> + return msm_dsi_host_check_dsc(host, mode, IS_BONDED_DSI());
>> }
>>
>> static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = {
>> --
>> 2.26.1
>>

\
 
 \ /
  Last update: 2023-11-20 13:59    [W:0.266 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site