lkml.org 
[lkml]   [2023]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
Date
A single RX Channel can have multiple flows. It is possible that a
single device requests multiple flows on the same RX Channel. In such
cases, the existing implementation of naming the device on the basis of
the RX Channel can result in duplicate names. The existing
implementation only uses the RX Channel source thread when naming, which
implies duplicate names when different flows are being requested on the
same RX Channel. In order to avoid duplicate names, include the RX flow
as well in the name.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
drivers/dma/ti/k3-udma-glue.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index 167fe77de71e..9415f03757bb 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -1094,8 +1094,8 @@ k3_udma_glue_request_remote_rx_chn_common(struct k3_udma_glue_rx_channel *rx_chn

rx_chn->common.chan_dev.class = &k3_udma_glue_devclass;
rx_chn->common.chan_dev.parent = xudma_get_device(rx_chn->common.udmax);
- dev_set_name(&rx_chn->common.chan_dev, "rchan_remote-0x%04x",
- rx_chn->common.src_thread);
+ dev_set_name(&rx_chn->common.chan_dev, "rchan_remote-0x%04x-0x%02x",
+ rx_chn->common.src_thread, rx_chn->flow_id_base);
ret = device_register(&rx_chn->common.chan_dev);
if (ret) {
dev_err(dev, "Channel Device registration failed %d\n", ret);
--
2.34.1
\
 
 \ /
  Last update: 2023-11-20 13:58    [W:0.099 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site