lkml.org 
[lkml]   [2023]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/8] dt-bindings: display: Add SSD132x OLED controllers
Date
Add a Device Tree binding schema for the OLED panels based on the Solomon
SSD132x family of controllers.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

.../bindings/display/solomon,ssd132x.yaml | 116 ++++++++++++++++++
1 file changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd132x.yaml

diff --git a/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
new file mode 100644
index 000000000000..b64904703a3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd132x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD132x OLED Controllers
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - solomon,ssd1322
+ - solomon,ssd1325
+ - solomon,ssd1327
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ # Only required for SPI
+ dc-gpios:
+ description:
+ GPIO connected to the controller's D/C# (Data/Command) pin,
+ that is needed for 4-wire SPI to tell the controller if the
+ data sent is for a command register or the display data RAM
+ maxItems: 1
+
+ solomon,height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Height in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+ solomon,width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: solomon,ssd1322
+ then:
+ properties:
+ width:
+ default: 480
+ height:
+ default: 128
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: solomon,ssd1325
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 80
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: solomon,ssd1327
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 128
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1327_i2c: oled@3c {
+ compatible = "solomon,ssd1327";
+ reg = <0x3c>;
+ reset-gpios = <&gpio2 7>;
+ };
+
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1327_spi: oled@0 {
+ compatible = "solomon,ssd1327";
+ reg = <0x0>;
+ reset-gpios = <&gpio2 7>;
+ dc-gpios = <&gpio2 8>;
+ spi-max-frequency = <10000000>;
+ };
+ };
--
2.41.0
\
 
 \ /
  Last update: 2023-10-09 20:38    [W:0.199 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site