lkml.org 
[lkml]   [2023]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
On Sun, May 14, 2023 at 12:36:32PM +0200, Marius Hoch wrote:
> The Dell Latitude E7450 uses IRQ 18 for the accelerometer,
> but also claims that the SMBus uses IRQ 18. This will
> result in:
>
> i801_smbus 0000:00:1f.3: PCI INT C: failed to register GSI
> i801_smbus 0000:00:1f.3: Failed to enable SMBus PCI device (-16)
> i801_smbus: probe of 0000:00:1f.3 failed with error -16
>
> Force the SMBus IRQ to IRQ_NOTCONNECTED in this case, so that
> we fall back to polling, which also seems to be what the (very
> dated) Windows 7 drivers on the Dell Latitude E7450 do.
>
> This was tested on Dell Latitude E7450.
>
> I chose to explicitly list all affected devices here, but
> alternatively it would be possible to do this programmatically:
> If the initial pcim_enable_device fails and we're on (any)
> Dell Latitude, re-try with IRQ_NOTCONNECTED.
>
> Marius Hoch (2):
> i2c: i801: Force no IRQ for Dell Latitude E7450
> i2c: i801: Force no IRQ for further Dell Latitudes
>
> drivers/i2c/busses/i2c-i801.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)

Where are we with this patch set? Other solution found already?
Discussion stalled? Too much other things going on?

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-10-29 18:18    [W:1.025 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site