lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 0/2] hwmon: ltc2945: Add binding and shunt resistor support
    Date
    Added the ability to specify the value of the shunt resistor in the
    device tree instead of assuming it is 1 milliOhm.

    Would be good to backport as well

    Changes since v2:
    - Remove newline
    - Combined overflow fix with "Allow setting shunt resistor" commit
    - Add description to "Add devicetree match table"
    - Add fix for unhandled error case in ltc2945_value_store
    - Use imperative in descriptions
    - Remove unneeded overflow check from ltc2945_reg_to_val
    - Fix up DIV_ROUND_CLOSEST_ULL calls, per docs divisor should be 32-bit
    - Split one DIV_ROUND_CLOSEST_ULL change into separate commit per
    Guenter Roeck's comment
    Changes since v1:
    - Add devicetree match table
    - Add kerneldoc for the ltc2945_data struct
    - Cleanup excesive comments about the shunt resistor
    - Switch to device_property_read_u32()

    Cormier, Jonathan (1):
    dt-bindings: hwmon: adi,ltc2945: Add binding

    John Pruitt (1):
    hwmon: ltc2945: Allow setting shunt resistor

    .../bindings/hwmon/adi,ltc2945.yaml | 50 +++++++++++
    drivers/hwmon/ltc2945.c | 86 ++++++++++++++-----
    2 files changed, 115 insertions(+), 21 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml

    --
    2.25.1

    \
     
     \ /
      Last update: 2023-03-26 23:34    [W:4.740 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site