lkml.org 
[lkml]   [2023]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
On Thu, Dec 15, 2022 at 03:15:32PM +0530, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> Make sure that the oneplus board dts (which includes the
> sm4250.dtsi) continues to work as intended.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 37 ++++++++++++++++++-
> 2 files changed, 38 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index 3f39f25e0721e..4f0d65574448b 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -232,6 +232,9 @@ &usb {
> &usb_dwc3 {
> maximum-speed = "high-speed";
> dr_mode = "peripheral";
> +
> + phys = <&usb_hsphy>;
> + phy-names = "usb2-phy";
> };
>
> &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index e4ce135264f3d..030763187cc3f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -579,6 +579,39 @@ usb_hsphy: phy@1613000 {
> status = "disabled";
> };
>
> + usb_qmpphy: phy@1615000 {
> + compatible = "qcom,sm6115-qmp-usb3-phy";
> + reg = <0x01615000 0x200>;
> + clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> + <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> + <&gcc GCC_AHB2PHY_USB_CLK>;
> + clock-names = "com_aux",
> + "ref",
> + "cfg_ahb";
> + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> + reset-names = "phy", "phy_phy";
> + status = "disabled";
> + #clock-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + usb_ssphy: phy@1615200 {

These patches looks good, but before introducing any
qcom,sm6115-qmp-usb3-phy in any DT, could we please update the binding
and driver to the new flattened format - to avoid having to revisit this
when we try to introduce DP (which I'm guessing this instance has?)

Regards,
Bjorn

> + reg = <0x01615200 0x200>,
> + <0x01615400 0x200>,
> + <0x01615c00 0x400>,
> + <0x01615600 0x200>,
> + <0x01615800 0x200>,
> + <0x01615a00 0x100>;
> + #phy-cells = <0>;
> + #clock-cells = <1>;
> + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> + clock-names = "pipe0";
> + clock-output-names = "usb3_phy_pipe_clk_src";
> + };
> + };
> +
> qfprom@1b40000 {
> compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
> reg = <0x01b40000 0x7000>;
> @@ -1023,8 +1056,8 @@ usb_dwc3: usb@4e00000 {
> compatible = "snps,dwc3";
> reg = <0x04e00000 0xcd00>;
> interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&usb_hsphy>;
> - phy-names = "usb2-phy";
> + phys = <&usb_hsphy>, <&usb_ssphy>;
> + phy-names = "usb2-phy", "usb3-phy";
> iommus = <&apps_smmu 0x120 0x0>;
> snps,dis_u2_susphy_quirk;
> snps,dis_enblslpm_quirk;
> --
> 2.38.1
>

\
 
 \ /
  Last update: 2023-03-26 23:31    [W:0.056 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site