lkml.org 
[lkml]   [2023]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [EXTERNAL] Re: [PATCH v13 2/6] remoteproc: pru: Add enum for PRU Core Identifiers.
From
Hi Mathieu,

On 06/01/23 01:53, Mathieu Poirier wrote:
> On Thu, Jan 05, 2023 at 02:51:45PM +0530, MD Danish Anwar wrote:
>> Introducing enum pruss_pru_id for PRU Core Identifiers.
>> PRUSS_PRU0 indicates PRU Core 0.
>> PRUSS_PRU1 indicates PRU Core 1.
>> PRUSS_NUM_PRUS indicates the total number of PRU Cores.
>>
>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
>> Reviewed-by: Roger Quadros <rogerq@kernel.org>
>> ---
>> drivers/remoteproc/pru_rproc.c | 7 ++++---
>> include/linux/pruss.h | 31 +++++++++++++++++++++++++++++++
>
> Please add this under include/linux/remoteproc/ to avoid adding an orphan file
> under include/linux/.
>
> Thanks,
> Mathieu
>

Sure, I will remove this header file from here and add it under
include/linux/remoteproc/ .

Thanks,
Danish.

>> 2 files changed, 35 insertions(+), 3 deletions(-)
>> create mode 100644 include/linux/pruss.h
>>
>> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
>> index 128bf9912f2c..a1a208b31846 100644
>> --- a/drivers/remoteproc/pru_rproc.c
>> +++ b/drivers/remoteproc/pru_rproc.c
>> @@ -16,6 +16,7 @@
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> #include <linux/of_irq.h>
>> +#include <linux/pruss.h>
>> #include <linux/pruss_driver.h>
>> #include <linux/remoteproc.h>
>>
>> @@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
>> dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
>> dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
>> /* PRU1 has its local RAM addresses reversed */
>> - if (pru->id == 1)
>> + if (pru->id == PRUSS_PRU1)
>> swap(dram0, dram1);
>> shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
>>
>> @@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru)
>> case RTU0_IRAM_ADDR_MASK:
>> fallthrough;
>> case PRU0_IRAM_ADDR_MASK:
>> - pru->id = 0;
>> + pru->id = PRUSS_PRU0;
>> break;
>> case TX_PRU1_IRAM_ADDR_MASK:
>> fallthrough;
>> case RTU1_IRAM_ADDR_MASK:
>> fallthrough;
>> case PRU1_IRAM_ADDR_MASK:
>> - pru->id = 1;
>> + pru->id = PRUSS_PRU1;
>> break;
>> default:
>> ret = -EINVAL;
>> diff --git a/include/linux/pruss.h b/include/linux/pruss.h
>> new file mode 100644
>> index 000000000000..e94a81e97a4c
>> --- /dev/null
>> +++ b/include/linux/pruss.h
>> @@ -0,0 +1,31 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/**
>> + * PRU-ICSS Subsystem user interfaces
>> + *
>> + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
>> + * Suman Anna <s-anna@ti.com>
>> + */
>> +
>> +#ifndef __LINUX_PRUSS_H
>> +#define __LINUX_PRUSS_H
>> +
>> +#include <linux/device.h>
>> +#include <linux/types.h>
>> +
>> +#define PRU_RPROC_DRVNAME "pru-rproc"
>> +
>> +/**
>> + * enum pruss_pru_id - PRU core identifiers
>> + * @PRUSS_PRU0: PRU Core 0.
>> + * @PRUSS_PRU1: PRU Core 1.
>> + * @PRUSS_NUM_PRUS: Total number of PRU Cores available.
>> + *
>> + */
>> +
>> +enum pruss_pru_id {
>> + PRUSS_PRU0 = 0,
>> + PRUSS_PRU1,
>> + PRUSS_NUM_PRUS,
>> +};
>> +
>> +#endif /* __LINUX_PRUSS_H */
>> --
>> 2.25.1
>>

\
 
 \ /
  Last update: 2023-03-26 23:29    [W:0.082 / U:1.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site